BOEN 80-Piece Impact Socket Set: Is the Master Kit the Right BOEN for You?

The BOEN Pro 80-Pieces 1/2″ & 3/8″ Drive Master Impact Socket Set is the headline kit. It includes 1/2-inch drive sockets from 10 to 32mm and 3/8-inch drive sockets from 8 to 24mm, each in deep and shallow versions, plus socket adapters and a 1/2″ drive 90-tooth handle wrench. A 90-tooth ratchet needs only a small swing of the handle to catch the next tooth, which helps in tight spaces. All sockets are metric, so this set does not cover SAE inch sizes.

The sockets are chrome molybdenum (Cr-Mo) steel, which the listing says resists rust and adds toughness for high-torque work. Markings are embossed, with yellow grooves on 1/2″ drive sockets and green grooves on 3/8″ drive sockets, so you can tell them apart at a glance. The 6-point design grips the flat sides of a bolt rather than its corners, reducing the chance of rounding it off. The listing says the set complies with ANSI B107.110-2020 for impact sockets. Unlike the others, it is laid out as a 24 by 16.7 inch drawer-liner tray made to sit in a tool cart drawer, and the listed weight is 12.8 kg.

This is the pick for someone with a tool cart who works mostly on metric vehicles and wants two drive sizes in one organized tray. Anyone working on older American vehicles with inch-size bolts should look at the 65-piece set, and those who need a carry case will prefer one of the smaller kits.

The BOEN 1/2″ Drive Impact Socket Set with 65 pieces is the all-rounder for mixed garages. It includes SAE deep and shallow sockets from 3/8″ to 1-1/4″ and metric deep and shallow sockets from 10 to 24mm, plus three extension bars, adapters and a ratchet wrench. Having both SAE and metric matters because many households own a mix of vehicles and equipment.

These sockets are drop-forged chrome vanadium (Cr-V) steel with a manganese phosphate finish, and the listing says they meet ANSI/ASME B107.110-2020. Size markings are deep grooves filled with yellow paint, designed to stay readable under grease. A blow-molded case has labeled slots for each socket. The listing notes a temporary rust-resistant oil that you wipe off before use.

Choose this set for a DIYer who does their own car maintenance and needs inch sizes as well as metric. It gives way to the 80-piece master kit for larger metric sizes up to 32mm, and to the 3/8″ or 1/4″ kits for smaller, tighter jobs. If you are weighing it against another 65-piece impact socket set, compare steel type and included handles.

The BOEN 3/8″ Drive Impact Socket Set with 67 pieces stands out for its swivel sockets. It has 40 shallow and deep sockets covering metric 8-19mm and SAE 5/16″-3/4″, plus 20 swivel sockets in the same size ranges. A swivel socket has a built-in hinge so it can reach a bolt at an angle. Accessories include 3″, 6″ and 10″ extension bars, a 3/8″ impact universal joint and adapters.

It is forged from heat-treated Cr-Mo steel with a black phosphate finish, and the listing says it was tested to ASME B107.10M. Markings are embossed and paint-filled over a yellow groove. The rounded 6-point head has a locking pin hole for a secure connection. The listing has some inconsistencies: the title says 3/8″ drive, yet the drive system spec reads “hex,” and the manufacturer is shown as SFG rather than BOEN. The listing does not specify a ratchet in the box.

This set suits someone working in cramped engine bays or on smaller cars. For lug nuts and larger bolts, the 1/2″ sets are a better match.

BOEN

BOEN Pro 1/4" Drive Impact Socket Set, 74-Piece SAE (3/16"-9/16") and Metric (4-15mm), 6-Point Deep & Shallow Kit with Deep Painted Marking, Cr-Mo, Includes Ratchet Handle,Universal Socket for DIYers

8.2/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

BOEN Pro 1 4″ Drive Impact

Best for: Small fasteners and detail work

Pros

• Tiny 4-15mm and SAE sizes
• 18 universal swivel sockets
• Cr-Mo steel, ratchet handle

Cons

• Too small for lug nuts
• 1/4 inch drive only

The BOEN Pro 1/4″ Drive Impact Socket Set with 74 pieces handles the smallest jobs. It includes 28 metric deep and shallow sockets from 4 to 15mm, 20 SAE deep and shallow sockets from 3/16″ to 9/16″, and 18 universal swivel sockets, plus a ratchet handle. The 1/4″ drive size is the smallest common drive and suits trim screws, small engine parts, appliances and bicycles.

The listing says the set is made entirely from Cr-Mo steel with a black phosphate finish, meets ANSI/ASME B107.110-2020, and has oversized, high-contrast yellow markings. A blow-molded case with label slots keeps it portable. It lists compatibility with drills, hand tools and impact drivers.

It is a thoughtful gift for a hobbyist or anyone starting a first toolbox. It is too small for lug nuts, so pair it with a 1/2″ set for car tires.

The boen 8mm-32mm 1/2” Drive Metric Socket Set is a focused deep-socket kit. It includes metric deep sockets 8-27mm, 29, 30 and 32mm, three extension bars (3″, 5″, 10″), a 1/2″ universal joint, a 3/8″F-1/2″M adapter and a 1/4″F-1/2″M drill socket adapter. The listing says larger sockets suit lug nut removal, smaller ones home and bicycle repair.

It uses heat-treated forged Cr-V steel, carries both laser and stamped markings, meets ANSI standards per the listing, and comes with a lifetime warranty and a portable case. The drill adapter lets you run sockets from a drill.

This is the pick for someone who wants a compact kit for tire changes. It lacks SAE sizes and shallow sockets, so a broader kit suits general repairs.