Captiva Designs Grill Parts: Bring Your Grill Back to Life
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Captiva Designs is known for affordable 4-burner propane grills, many with a side burner, and after a few seasons of use the parts that sit closest to the flame start to wear out. The two parts that fail most often are the heat plates, the metal tents that sit over each burner, and the burner tubes, the pipes with holes that carry gas and make the flames. Swapping them is a common, beginner-friendly repair that can make an old grill light evenly again.
An honest note before you shop: none of these four products is made by Captiva Designs. They are third-party replacement parts from SafBbcue, WEBROIL and PETKAO, sold “for” Captiva Designs grills. Here is how they differ: two are complete kits with heat plates and burners, one is heat plates only and one is burner tubes only.
Captiva Designs Grill Replacement Parts Compared
| Model | Maker | What is included | Listed part length | Materials |
|---|---|---|---|---|
| SafBbcue Heat Plate & Burner Kit | SafBbcue | 4 heat plates, 4 burners | Not listed | Porcelain enameled steel plates, stainless steel burners |
| Heat Plate for Captiva Designs G41 | WEBROIL | Heat plates (count unclear) | 14.17 in plate | Porcelain enameled steel |
| Burner Tubes for Captiva Designs 4-Burner | PETKAO | 4 burner tubes, mounting hardware | 15.94 in tube | Stainless steel |
| Grill Parts Kit for Captiva Designs | WEBROIL | 4 heat plates, 4 burner tubes | 14.17 in plate, 15.94 in tube | Porcelain steel plates; burner material not listed |
SafBbcue Heat Plate & Burner Kit for GR001 and GR001B Grills
Webroil
Heat Plate for Captiva Designs/G41 Pro/ Sophia & William 4-Burner Gas Grill
Price and specifications are read from the Amazon product page and can change.
Heat Plate for Captiva Designs G41
Best for: Rusted heat plates with healthy burners
Pros
- Porcelain-enameled steel
- 17-inch listed length
- Wide list of compatible grills
Cons
- Plate count unclear in listing
- No burners included
Best for: GR001 and GR001B owners replacing everything
Pros
- 4 heat plates plus 4 burners
- Stainless steel burner tubes
- Names GR001 and GR001B models
Cons
- Part lengths not listed
- Must confirm grill model first
The SafBbcue Heat Plate & Burner Kit is a full replacement set for Captiva Designs 4-burner propane grills. It includes four porcelain steel heat plates and four stainless steel burners, and it is the only listing in this group that names specific Captiva Designs model numbers: GR001 and GR001B. If you can find one of those numbers on your grill’s label, this kit is the most direct match.
SafBbcue says the heat plates are made from thickened porcelain enameled steel, a coating of glass-like enamel fused to steel that helps resist rust and wipes clean easily. The plates protect the burners from dripping grease, and when drippings hit the hot plate they vaporize, which adds smoky flavor to the food. The burner tubes have evenly spaced outlet holes for a steady, even flame. The package weighs 3.72 pounds and measures 16.45 x 5.28 x 2.76 inches. The listing does not specify the length of each heat plate or burner, and it asks you to double-check the dimensions and grill model before ordering.
This kit suits owners of a GR001 or GR001B who want to replace both worn parts at once. If your model number is different, the WEBROIL kit further down lists exact part lengths you can measure against.
Heat Plate for Captiva Designs G41 Pro and Sophia & William Grills
The Heat Plate for Captiva Designs G41 Pro and Sophia & William 4-burner gas grills is a WEBROIL heat plate replacement. Its listing names the widest range of compatible grills in this group: Captiva Designs 4-burner models, the Electactic G41 Pro 4-burner grill, Sophia & William 4-burner grills with a side burner, and an Electactic 3-burner propane grill with a side burner. The listed length is 14.17 inches.
The plate is heavy-duty porcelain-enameled steel, which WEBROIL says resists rust, chipping and high heat. It sits between the cooking grate and the burner, shields the burner tubes from grease and corrosion, and vaporizes drippings to reduce flare-ups. The spec sheet lists a 2.18-pound item weight and a part number ending in “-4,” but it also lists an item package quantity of 1, so the listing does not clearly say how many plates are in the box. Check the product photos or ask the seller before ordering if you need four.
Choose this if your burners still light well but the old heat plates are rusted through, sagging or flaking. If your burners are also worn, a kit saves a second order.
Burner Tubes for Captiva Designs 4-Burner Grills with Side Burner
Petkao
Burner Tubes for Captiva Designs 4-Burner Propane Gas BBQ Grill Replacement Parts with Side Burner Burners for Captiva Designs Grill Accessories, Rust-resistant Stainless Steel, Heat-resistant, 4 PCS
Price and specifications are read from the Amazon product page and can change.
Burner Tubes for Captiva Designs 4-Burner
Best for: Weak or uneven flames only
Pros
- 4 stainless steel burner tubes
- 94-inch length stated
- Mounting hardware included
Cons
- No heat plates included
- Specific grill model numbers not listed
The Burner Tubes for Captiva Designs 4-Burner propane grills with a side burner are a four-pack of stainless steel tubes from PETKAO. Each tube is 15.94 inches long, and the listing says complete mounting hardware is included, which is helpful for beginners who find a rusted screw that will not come out cleanly.
PETKAO describes thickened tube walls, high heat and corrosion resistance, and precision-drilled flame holes along a straight tube for a clean blue flame and even heat. A blue flame is a good sign in any gas grill because it means the gas is burning completely; a lazy yellow flame often points to a clogged or damaged burner. The package weighs 1.46 pounds. The listing does not name specific Captiva Designs model numbers.
This is the right pick if your heat plates still look solid but the flames are weak, uneven or yellow. It gives way to the two kits if both parts are worn.
Grill Parts Kit for Captiva Designs 4-Burner Grills with Full Measurements
Webroil
Grill Parts Kit for Captiva Designs 4-Burner Grill Replacement Parts
Price and specifications are read from the Amazon product page and can change.
Grill Parts Kit for Captiva Designs
Best for: Full refresh with measured part sizes
Pros
- 4 heat plates and 4 burner tubes
- Both lengths listed
- Porcelain steel heat plates
Cons
- Burner material not specified
- Measure before ordering
The Grill Parts Kit for Captiva Designs 4-burner grills with a side burner is WEBROIL’s complete set. The listing is clear about contents: four heat plates at 14.17 inches long and four burner tubes at 15.94 inches long. Having both lengths on the listing makes it the easiest kit to match with a tape measure.
The heat plates are porcelain-enameled steel that resist rust, chipping and heat and clean up easily. They sit between the grate and the burners, vaporize drippings to reduce flare-ups and protect the burners from corrosion. WEBROIL says the burner tubes install in seconds and give stable flames. The listing calls them premium but does not specify the burner material. The kit weighs 3.67 pounds.
This suits the owner who wants a full refresh and prefers to measure rather than rely on a model number. If your grill is a GR001 or GR001B, the SafBbcue kit names those models directly.
How to Choose the Right Captiva Designs Grill Replacement Parts
Find your model number. Look for a label on the back, the side or inside the cabinet door. The SafBbcue kit lists GR001 and GR001B, while the other listings describe the grill as a Captiva Designs 4-burner with a side burner.
Measure your old parts. Pull one heat plate and one burner and measure end to end. Compare them to the 14.17-inch plates and 15.94-inch tubes listed by WEBROIL and PETKAO. Also note the shape of the burner ends where they attach.
Decide what is worn. Rusted-through or flaking heat plates call for the WEBROIL heat plate. Yellow, uneven or missing flames point to the PETKAO burner tubes. Both worn means a kit. The same measure-first habit helps with other outdoor repairs, such as finding lawn mower replacement parts.
Plan the swap safely. Close the propane tank, disconnect it, and let the grill cool completely before removing parts. After installation, reconnect and check for leaks with soapy water on the connections.
Think about other grill types. Pellet grills wear different parts. If you also own one, our guide to a pellet grill fire burn pot explains that repair.
FAQ
Are these parts made by Captiva Designs?
No. They are third-party parts from SafBbcue, WEBROIL and PETKAO designed to fit Captiva Designs grills. Always confirm fit with your model number and measurements.
Which Captiva grill parts should I buy?
For a GR001 or GR001B, the SafBbcue kit names your model. For other 4-burner Captiva grills, the WEBROIL kit lists both part lengths. Buy only plates or only burners if just one part is worn.
Do these fit the G41 Pro or Sophia & William grills?
The WEBROIL heat plate listing names the Electactic G41 Pro and Sophia & William 4-burner grills with a side burner. The other listings do not mention those grills.
How do I know my burners need replacing?
Signs include weak, yellow or uneven flames, rust holes, or burners that will not light across their full length.
What does a heat plate do?
It shields the burner from grease, spreads heat more evenly across the grate and vaporizes drippings into smoke that flavors food.
Is installation hard for a beginner?
Usually it is a matter of lifting out grates, removing a screw or clip per burner and dropping new parts in. The PETKAO tubes include mounting hardware.
