FLEX 24V Drill and Impact Driver Combo Kits: Which One to Start With?

Best for: Adding a compact driver to FLEX

Pros

• Self-tapping screw mode
• 17% lighter than FX1351
• Up to 350 3-inch screws per charge

Cons

• Single tool, no drill
• One 2.5Ah battery

Best for: New homeowners outfitting a workshop

Pros

• Six tools incl. circular saw
• Hammer drill 35,200 IPM
• 5Ah and 5.0Ah batteries

Cons

• Only two batteries for six tools
• 44 lb kit

FLEX

FLEX 24V Brushless Cordless 2-Tool Combo Kit: 1/2-Inch 2-Speed Drill Driver and 1/4-Inch Hex Impact Driver with (2) 2.5Ah Lithium Batteries and 160W Fast Charger – FXM201-2A

4.4average rating from Amazon buyers, out of 5

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

FLEX 24V Brushless Cordless 2-Tool Combo

Best for: First-time buyers starting a platform

Pros

• 750 in-lb drill driver
• 1,800 in-lb impact driver
• Two 2.5Ah batteries

Cons

• No Turbo or quick eject
• No hammer mode

Best for: Drilling into brick and concrete

Pros

• Hammer drill up to 40,000 IPM
• Turbo Mode, 1,400 in-lb torque
• Stacked Lithium batteries

Cons

• Smaller 2.0Ah batteries
• Wood capacity listed at 0.5 in

Best for: Heavy drilling with a bigger battery

Pros

• 1,400 in-lb drill with Turbo Mode
• 2,500 in-lb quick eject impact driver
• 5Ah and 5.0Ah batteries
• Bits, holders and belt clip

Cons

• No hammer mode for masonry
• 6 lb kit weight

Best for: Overhead and between-stud work

Pros

• 17% more compact than FX1151
• 22% lighter than FX1151
• 650 in-lb drill torque
• Two 2.5Ah batteries

Cons

• Lowest drill torque here
• Warranty wording tied to 2025 date

The FLEX 24V Brushless Cordless 2-Tool Compact kit (FXM205-2A) pairs a 1/2-inch 2-speed compact drill driver with a 1/4-inch hex compact impact driver. FLEX says the compact drill is 17 percent more compact and 22 percent lighter than its standard FX1151 drill, which helps when you are reaching between wall studs or working overhead. The drill delivers 650 inch-pounds of torque and up to 1,800 RPM. Torque is twisting force; higher numbers drive bigger screws and bore larger holes more easily.

The kit includes two 2.5Ah batteries and a 160W fast charger. The listing does not give the compact impact driver’s torque or speed. Its warranty note offers a limited lifetime warranty for tools registered within 30 days through December 31, 2025, so check the current warranty terms on the product page.

This suits renters, hobbyists and anyone who values light weight over maximum power: hanging shelves, building furniture, small repairs. For deck building or larger holes, the FXM204-2B’s Turbo drill has more than twice the torque.

The FLEX 24V Brushless Cordless 2-Tool Combo kit (FXM204-2B) is the power pick among the regular drill kits. The FX1171T drill driver has Turbo Mode, a boost setting, and reaches 1,400 inch-pounds of torque at up to 2,500 RPM. The FX1371A impact driver delivers 2,500 inch-pounds and 4,000 RPM, with a quick eject collet that pops bits out with one push and Multi-Mode Control for adjusting power.

You get one 2.5Ah and one 5.0Ah battery, a 160W charger, two bits, bit holders and a belt clip. Ah, or amp-hours, measures battery capacity; the 5.0Ah pack runs roughly twice as long as the 2.5Ah before recharging. FLEX cites THERMA-TECH heat management for longer runtime. The listing offers a 5-year limited warranty with registration, 3 years without, though the spec line says limited lifetime, so confirm the terms. The kit weighs 17.6 pounds.

This suits homeowners tackling decks, fences and big DIY builds. It does not have a hammer mode, so for drilling into concrete, the FXM202-2K is the right kit.

The FLEX 24V Brushless Cordless Hammer Drill kit (FXM202-2K) swaps the standard drill for a hammer drill. A hammer drill adds a rapid forward tapping action while it spins, measured in IPM, impacts per minute. That tapping chips away at brick, block and concrete. The FX1271T hammer drill reaches 1,400 inch-pounds, 2,500 RPM and 40,000 IPM, with Turbo Mode. The FX1371A impact driver is the same quick eject, 2,500 inch-pound model as the FXM204-2B.

The kit includes two 2.0Ah Stacked Lithium batteries and a 160W charger. FLEX says Stacked Lithium brings more power, longer life with THERMA-TECH+ and faster charging, and the batteries still fit all FLEX 24V tools. The listing gives a wood drilling capacity of 0.5 inches, which likely reflects the chuck size, so do not read it as a hard limit. It carries the same 5-year registered warranty.

This suits homeowners who need to mount things on brick or concrete. If you only work with wood and drywall, the FXM204-2B gives the same torque with a bigger 5.0Ah battery.

The FLEX 24V Brushless Cordless 2-Tool Combo kit (FXM201-2A) is the straightforward starter kit. It pairs the FX1151 drill driver, rated at 750 inch-pounds, with the FX1351 impact driver at 1,800 inch-pounds and 3,400 RPM. It includes two 2.5Ah batteries and a 160W charger, with FLEX’s 5-year registered warranty.

It lacks Turbo Mode and the quick eject collet of the FXM204-2B, but covers everyday drilling and driving. This suits first-time buyers who want a well-rounded pair. For comparing kits across the market, our overview of a drill and impact driver set explains what to expect at this level.

The FLEX 24V Brushless Cordless 6-Tool Combo kit (FXM601-2B) includes the FX1251 hammer drill (750 inch-pounds, 35,200 IPM), the FX1351 impact driver (1,800 inch-pounds, 3,400 RPM), the FX2141 7-1/4-inch circular saw with a 2-9/16-inch depth of cut, the FX4111 oscillating multi-tool at 20,000 OPM, the FX2271 reciprocating saw with orbital and linear modes, and a work light. It comes with one 2.5Ah and one 5.0Ah battery and a 160W charger, and weighs 44 pounds.

This suits new homeowners who want to cut lumber, trim doors and demolish old fixtures as well as drill. Two batteries for six tools means you will swap packs often on big jobs.

The FLEX 24V Brushless Cordless 1/4-Inch Hex Compact Impact Driver kit (FX1331-1A) is a single tool with a 2.5Ah battery and 160W charger. It reaches 1,700 inch-pounds and 3,000 RPM, is 17 percent lighter than the FX1351, and has two speed modes plus a Self-Tapping Screw Mode that helps prevent over-tightening, breaking or stripping screws. FLEX says the battery drives up to 350 three-inch screws into 2×4 lumber per charge.

This suits electricians, HVAC work and metal framing, or anyone who already owns a FLEX drill. As a first kit it lacks a drill. You can also compare it with a cordless impact drill from our wider guides.