Skip to content
BuyShelf.net One clear way in to every guide

Power & Outdoors

Go Power! RV Solar Panels: Starter Kits vs Expansion Panels

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Go Power! is a name many RV owners meet early, because the brand builds solar gear specifically for campers, boats and trailers, and some RVs even come from the factory prewired for its panels. For a first-time owner, the hardest part is not the sunshine but the vocabulary: kits, expansion panels, charge controllers and connectors all sound alike until someone explains them.

The six panels here fall into two groups: starter charging kits that include everything needed to charge a battery (the GP-PSK-130, the Overlander and the DuraLite), and expansion panels that add power to a system you already own (the Overlander-E, the DuraLite-E and the GP-FLEX-110E).

Go Power! RV Solar Panels Compared

Model Type Power Weight Controller Included
GP-PSK-130 Portable Kit Portable folding kit 130 watts 28.7 pounds Not listed
Overlander-E 200W Expansion panel 200 watts Not listed No
Overlander 200W Kit Rooftop charging kit 200 watts (190 watts in description) 35 pounds Yes, 30-amp PWM with Bluetooth
DuraLite 100-Watt Portable folding kit 100 watts 8.5 pounds Yes, 30-amp PWM
DuraLite-E 100-Watt Portable expansion panel 100 watts 10 pounds No
GP-FLEX-110E Flexible expansion panel 100 watts (110 watts in description) 2.9 pounds No

Go Power GP-PSK-130 130W Portable RV Kit for Grab-and-Go Camping


Go Power GP-PSK-130 130W Portable RV Solar Panel Kit - Folding Solar Panels

GoPower

Go Power GP-PSK-130 130W Portable RV Solar Panel Kit – Folding Solar Panels

8.4/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

Go Power GP-PSK-130 130W Portable RV

Best for: Campers wanting a grab-and-go folding kit

Pros

  • Folding design with nylon case
  • Adjustable angle legs
  • Many connectors plus battery clamps
  • Works with AGM or lithium

Cons

  • Listed at 28.7 pounds

The Go Power GP-PSK-130 130W Portable RV solar kit is a folding panel you set on the ground next to your campsite rather than bolting to the roof. It is rated at 130 watts maximum power, 6.7 amps and 19.7 volts maximum, and it folds for storage in a heavy-duty nylon case. Adjustable legs let you tilt it toward the sun, which matters because a panel pointed straight at the sun collects noticeably more energy than one lying flat.

What makes this go power gp-psk-130 portable kit friendly for beginners is the pile of connection options in the box: Anderson-style connectors, an SAE plug, an XLR plug, ring terminals and battery clamps. In plain words, it can clip directly onto a battery or plug into a port your RV may already have. The listing says it supports AGM or lithium batteries, two common RV battery types. One number to note is weight: the listing gives 28.7 pounds, so it is portable but not featherlight.

This suits weekend campers, boaters and anyone who parks in shade and wants to move the panel into the sun. If you want something lighter, the DuraLite below weighs far less, and if you want a permanent roof system, look at the Overlander.

Go Power Overlander-E 200W Black 12V Expansion Kit for Growing a 200W System


Go Power Overlander 200W 12V Solar Panel Charging Kit

High score Our score: 9.6/10

Go Power

Go Power Overlander 200W 12V Solar Panel Charging Kit

9.6/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

Go Power Overlander 200W 12V Solar

Best for: First-time RV owners building a roof system

Pros

  • Bluetooth 30-amp PWM controller
  • Two 25 ft output cables
  • Controller expands to 600 watts
  • 25-year limited output coverage

Cons

  • Listing mixes 190W and 200W figures
  • Heavy at 35 pounds
Go Power Overlander-E 200W Black 12V
Go Power Overlander-E 200W Black 12V

Best for: Owners expanding a 200W Go Power! system

Pros

  • Adds 200 watts
  • MC4 parallel connectors included
  • No complex wiring

Cons

  • No controller included
  • Needs an existing Go Power! system

The Go Power Overlander-E 200W Black 12V expansion kit is an add-on panel, not a complete system. The “E” stands for expansion: it is made to join a Go Power! setup you already have, specifically factory-installed 200W Go Power! RV panels and Overlander kits, according to the listing.

The kit includes a 200 watt rigid solar panel and MC4 parallel connectors. MC4 is the standard weatherproof plug used on solar panels, and “parallel” wiring means the new panel adds its current alongside your existing one. The listing promises easy installation with no complex wiring, a 12-volt output, and good performance even in low sunlight. Its dimensions are listed at 26.3 by 59.1 inches, and the weight is not specified.

This is the right choice for RV owners who already have a 200W Go Power! panel on the roof and find their batteries still run low. It does not include a charge controller, so a first-time buyer with no existing system should start with the Overlander kit instead.

Go Power Overlander 200W 12V Solar Charging Kit for a Complete Rooftop Starter

The Go Power Overlander 200W 12V Solar charging kit is the full starter package for a roof-mounted system. It comes with a 200W solar module, a Bluetooth enabled 30-amp PWM solar controller and two 25-foot solar output cables, one male and one female. A charge controller is the small box that sits between the panel and the battery and stops the battery from overcharging; Bluetooth lets you check it from your phone.

The listing figures do not fully agree. The title and features say 200 watts, with 9.6 amps in one feature line, while the specifications list 9.3 amps and the description says 190 watts and 9.3 amps. Either way, it is aimed at extended RVing and dry-camping, meaning staying somewhere with no electrical hookup. The listing also mentions a 25-year limited solar panel output coverage, an aluminum frame, and a 35-pound weight. The description notes that this kit is the one included in the brand’s Solar Extreme, Solar Elite and Weekender ISW systems.

The big advantage for a first-time owner is room to grow: the 30-amp controller supports up to 600 watts of solar with the same controller, which is where the Overlander-E comes in later. It suits anyone who wants a permanent setup and can handle a roof install.

Go Power DuraLite 100-Watt Solar Panel for Light Portable Charging


Go Power DuraLite 100-Watt Solar Panel with 30-Amp PWM Charge Controller

High score Our score: 9.8/10

Go Power

Go Power DuraLite 100-Watt Solar Panel with 30-Amp PWM Charge Controller

9.8/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

Go Power DuraLite 100-Watt Solar Panel

Best for: Light portable starter for small campers

Pros

  • Only 8.5 pounds
  • Built-in 30-amp PWM controller
  • Expands to 300 watts

Cons

  • Only 100 watts on its own

The Go Power DuraLite 100-Watt Solar Panel is a folding portable kit that weighs just 8.5 pounds, according to the listing. It delivers 100 watts of solar power at 5 amps and uses high-efficiency monocrystalline cells, a common type of solar cell made from a single silicon crystal.

It includes a built-in 30-amp PWM charge controller with a digital display, plus the accessories needed to connect to a battery. The listing says you can add up to two more panels to reach 300 watts, which is why the specifications show 300 watts maximum and 30 amps: those numbers describe the full expanded system and the controller, not this single panel. It is designed to run RV lights, fans and other DC appliances, and the listing mentions RVs, campers, ATVs and boats.

This suits tent trailer owners, van campers and gift-givers looking for a manageable first solar panel. It produces less power than the 130W folding kit, but it is far lighter, and it grows with the DuraLite-E below. If you are also comparing all-in-one battery boxes, our portable power station solar panel guide explains how panels and power stations work together.

Go Power DuraLite-E 100-Watt Expansion Solar Panel for Extra Portable Power

Best for: DuraLite owners needing more charging

Pros

  • Built-in USB chargers in handles
  • Kickstands and magnetic closures
  • No mounting required

Cons

  • Needs DuraLite or compatible kit
  • 2 years of panel coverage

The Go Power DuraLite-E 100-Watt Expansion Solar panel is the add-on partner for the DuraLite kit. It connects directly to an existing Go Power DuraLite Solar Kit or a compatible power system to increase charging capacity, with no extra installation required.

The standout detail is its rugged plastic handles with built-in USB chargers, so you can charge a phone straight from the panel. The listing also names integrated kickstands, adjustable folding legs, magnetic closures, quick-connect ends and a compact carrying case. It is rated at 100 watts and 4.5 amps, weighs 10 pounds, and comes with 2 years of solar panel coverage.

This suits DuraLite owners who find one panel is not quite enough on cloudy trips. It does not include its own charge controller according to the listing, so it is not a stand-alone starter kit.

Go Power GP-FLEX-110E Flexible Expansion Kit for Curved Surfaces

Best for: Curved roofs, boats and truck cabs

Pros

  • Curves up to 30 degrees
  • Walkable surface
  • Only 2.9 pounds
  • Installation hardware included

Cons

  • Listing mixes 100W and 110W
  • Expansion only, no controller

The GP-FLEX-110E is a flexible monocrystalline panel that adds charging power to an existing Go Power! system. Flexible means it bends: the listing says it curves up to 30 degrees, which suits rounded RV roofs, marine decks and truck cabs where a rigid framed panel will not sit flat.

Wattage is the confusing part of this listing. The title and specifications say 100 watts and 5.71 amps and the model number reads GP-FLEX-100E, while the description calls it a 110-watt kit. The listing agrees on the rest: a walkable surface, a weight of 2.9 pounds, a claim of being 82 percent lighter than framed panels, included Solar Branch Connectors for parallel wiring, and everything needed to install. It is built for marine, RV and long haul truck use.

This suits owners with a curved roof or a boat who already have a Go Power! controller. Like the other expansion panels, it does not include a controller, so beginners should pair it with a kit such as the Overlander.

How to Choose the Right Go Power! RV Solar Panel

Decide first whether you need a starter kit or an expansion panel. If you have no solar yet, pick a kit that includes a charge controller: the Overlander for a roof, or the DuraLite for a light portable option. The GP-PSK-130 is also a kit built to connect to a battery, though its listing does not specify a controller. If you already own a Go Power! system, an expansion panel is the cheaper way to add power without new wiring.

Next, choose between mounted and portable. Roof panels charge all day while you drive or park. Portable folding panels can chase the sun when your campsite is shaded, but you set them up and pack them away each time.

Then match the expansion to the system. The Overlander-E is made for 200W Go Power! panels and Overlander kits, the DuraLite-E for the DuraLite kit, and the GP-FLEX-110E for existing Go Power! systems with curved mounting spots. Check your controller’s limit too: the Overlander controller supports up to 600 watts and the DuraLite up to 300 watts.

Finally, weigh the weight. The GP-FLEX-110E is the lightest at 2.9 pounds, the DuraLite is 8.5 pounds, and the Overlander kit is 35 pounds. If you want a battery box that plugs into panels like these, our portable power station roundup covers that route.

FAQ

What is the difference between a Go Power! kit and an expansion panel?

A kit includes what you need to charge a battery, such as a controller and cables. An expansion panel, marked with an “E” in the name, adds extra power to a Go Power! system you already have.

Which Go Power panel should a first-time RV owner buy?

For a permanent roof system, the Overlander 200W kit is the natural starting point because it includes a Bluetooth controller that supports up to 600 watts. For portable use, the DuraLite 100-Watt is light and includes a controller.

Can I add more panels to my Go Power! system later?

Yes. The Overlander controller supports up to 600 watts, and the DuraLite kit accepts up to two more panels for 300 watts. The Overlander-E, DuraLite-E and GP-FLEX-110E are built for this job.

Is the GP-FLEX-110E 100 watts or 110 watts?

The listing is inconsistent. The title and specifications say 100 watts and 5.71 amps, while the description calls it a 110-watt kit, so plan around the lower figure.

What batteries do Go Power! portable kits charge?

The GP-PSK-130 listing says it supports AGM or lithium batteries. The other listings talk about charging RV batteries in general and do not name every battery type.

More in Power & Outdoors