Ingersoll Rand Air Hammer Guide: Which Stroke Length Fits Your Job?
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Ingersoll Rand, often shortened to IR, is one of the best-known names in air tools for auto shops and maintenance crews. Its air hammers, also called air chisels, use compressed air to drive a piston back and forth very quickly, hitting a chisel bit thousands of times a minute. Mechanics use them to cut exhaust pipes, knock out stuck pins, split rusted nuts and chip away metal or concrete.
The six IR models below differ mostly in stroke length, barrel style and duty level. In one sentence: the 119MAXK and 135MAX are long-barrel hammers for hard hits, the 114GCQ and 115K are shorter, faster hammers for everyday exhaust work, and the 2DA2SA and 2A2SA are heavier chipping hammers built for demolition and metal removal.
Ingersoll Rand Air Hammers Compared
| Model | Stroke | Max blows per minute | Weight | Chisels included |
|---|---|---|---|---|
| 119MAXK | 3 1/2 in., long barrel | 2,530 | 4.5 lbs | 5-piece set |
| 114GCQ | 2 5/8 in. | 3,500 | 4.1 lbs | 3-piece set |
| 135MAX | 3 in., long barrel | 2,600 | 4.5 lbs | Not listed (retainer only) |
| 115K | Not listed | 5,000 | 2.6 lbs | 5 chisels |
| 2DA2SA | 2 in. | 2,200 | 11.75 lbs | Not listed |
| 2A2SA | 2 in. | 2,300 | Not listed | Not listed |
A few terms, explained simply. Stroke is how far the piston travels inside the hammer on each hit. A longer stroke means each blow lands harder, while a shorter stroke usually means more blows per minute (BPM) with less force each. Long barrel means the body that houses the piston is longer, which makes room for that long stroke. A retainer is the spring or clip at the front that holds the chisel in place; a quick-change retainer lets you swap chisels without tools.
Ingersoll Rand 119MAXK Long-Barrel Kit for Hard Hits

Ingersoll Rand
Ingersoll Rand 119MAXK 3 1/2" Stroke Long-Barrel Air Hammer Kit
Price and specifications are read from the Amazon product page and can change.
Ingersoll Rand 119MAXK 3 1 2″
Best for: Hard-hitting body shop and MRO work
Pros
- 3 1/2 inch stroke, long barrel
- 5-piece long-barrel chisel set
- Anti-vibration system
- Swivel air inlet
Cons
- Lower BPM than short-stroke models
- 1-year limited warranty
The Ingersoll Rand 119MAXK 3 1/2″ air hammer kit is the longest-stroke hammer in this guide. The listing says the 119MAX delivers up to 2,530 BPM with a 3 1/2″ stroke and claims a 15% increase in impact force, backed by alloyed steel construction and heat-treated pistons. The kit includes the hammer, a quick-change retainer and a 5-piece long-barrel chisel set for exhaust work, cutting and pin driving. An air compressor is not included.
For comfort, the listing mentions an advanced anti-vibration system, an anti-slip grip that absorbs shock, and a swivel air inlet that turns with the hose so it does not tangle. The description gives a weight of 4.5 pounds, and the warranty is 1 year limited. It is aimed at body shops and MRO work, which stands for maintenance, repair and operations.
Pick the 119MAXK if the jobs are stubborn: rusted bolts, thick pipe or heavy cutting where each blow needs to count. If you want speed over force, the 114GCQ gives way here.
Ingersoll Rand 114GCQ EDGE Series for Everyday Exhaust Jobs

Ingersoll Rand
Ingersoll Rand 114GCQ EDGE Series 2 5/8" Stroke Air Hammer Kit
Price and specifications are read from the Amazon product page and can change.
Ingersoll Rand 114GCQ EDGE Series 2
Best for: Fast exhaust and front-end jobs
Pros
- Up to 3,500 BPM
- 3-piece chisel set included
- Quick-change retainer
- 1 pound design
Cons
- Fixed air inlet
- Model number differs in specs
The Ingersoll Rand 114GCQ EDGE Series 2 5/8″ stroke air hammer kit is the fast, general-purpose option. The listing states up to 3,500 BPM and calls it ideal for exhaust and front-end jobs, bolt cutting, pin driving and body shearing. The kit comes with a quick-change retainer and a 3-piece chisel set, and the description puts it at 4.1 pounds.
It shares the anti-vibration system, anti-slip grip, alloyed steel construction and heat-treated piston described for the 119MAXK, but it uses a fixed air inlet instead of a swivel one, and the listing describes it as standard duty. The warranty is 1 year limited. One small note: the specifications print the model number as “114GQC,” while the title says 114GCQ; the listing does not explain the difference.
This is a sensible first IR air hammer for a home mechanic or a gift for someone starting out in a shop. To run it you need a suitable air supply; our guide to a shop air compressor covers the basics of choosing one.
Ingersoll Rand 135MAX Long-Barrel Hammer for Controlled Power

Ingersoll Rand
Ingersoll Rand 135MAX 3" Stroke Long-Barrel Air Hammer
Price and specifications are read from the Amazon product page and can change.
Ingersoll Rand 135MAX 3″ Stroke Long-Barrel
Best for: Mechanics wanting fine trigger control
Pros
- Feather-able trigger
- 3 inch stroke, long barrel
- Quick-change retainer included
Cons
- No chisels listed in box
- Sold as tool only
The Ingersoll Rand 135MAX 3″ Stroke Long-Barrel Air Hammer sits between the 119MAXK and 114GCQ in stroke length. The listing gives up to 2,600 BPM and a weight of 4.5 pounds, and says it is ideal for exhaust and front-end jobs as well as automotive repair, bolt cutting and pin driving.
Its headline feature is a feather-able trigger. “Feather-able” means you can squeeze the trigger gently for light, controlled taps or fully for maximum hitting power, much like easing onto a car’s accelerator. The listing also mentions a shock reduction function, an anti-slip grip and an included quick-change retainer, and says it withstands harsh environments and repeated drops.
The included components list only the hammer itself, so plan to buy chisels separately if you do not already own long-barrel bits. The 135MAX suits someone who already has chisels and values fine control.
Ingersoll Rand 115K Standard Duty Kit for Light Work

Ingersoll Rand
Ingersoll Rand 115K Standard Duty Pneumatic Hammer Kit
Price and specifications are read from the Amazon product page and can change.
Ingersoll Rand 115K Standard Duty Pneumatic
Best for: Beginners doing light exhaust work
Pros
- Lightest here at 2.6 lbs
- Up to 5,000 blows per minute
- Built-in power regulator
- Five chisels included
Cons
- Standard duty, lighter jobs
- Some specs look copied from drills
The Ingersoll Rand 115K Standard Duty Pneumatic Hammer Kit is the lightest and fastest model here. The listing says it weighs 2.6 lbs and delivers up to 5,000 blows per minute, with a built-in power regulator so you can dial speed and power up or down. It has an alloyed steel barrel and heat-treated piston, and the description calls it designed for light exhaust system work and general cutting, chipping and scraping.
The kit includes five chisels: a punch chisel, edging tool, tail pipe cutter, blade straight chisel and cutting chisel. The listing does not state the stroke length. Some specs look copied from a different tool type: it lists 11 A amperage and a “hammer drill” type, which do not apply to an air-powered hammer, so rely on the feature bullets instead.
The 115K is the friendliest choice for beginners and occasional DIY use. For heavy, daily work, the long-barrel 119MAXK or 135MAX are better suited.
Ingersoll Rand 2DA2SA Chipping Hammer for Demolition
Best for: Light demolition and metal removal
Pros
- D-handle design
- Steel cone keeps bit secure
- Directional exhaust
Cons
- Heavy at 11.75 lbs
- No chisel included
The Ingersoll Rand 2DA2SA 2″ Stroke Air Chipping Hammer belongs to IR’s D Series. A chipping hammer is a larger, heavier air hammer meant for removing material such as concrete, scale or metal. The description says it is ready for tasks from light demolition to metal removal, with an easily serviceable D-handle and directional exhaust that lets you point the air blast away from you.
The listing gives 2,200 BPM, a .68″ round shank (the shape of the chisel end it accepts), a steel cone that keeps the bit from falling out, and a 1-year warranty. It calls the hammer lightweight at 11.75 lbs, but that is by far the heaviest weight in this guide. Only the hammer is included. This suits construction and fabrication work, not quick exhaust repairs.
Ingersoll Rand 2A2SA Chipping Hammer for Tight Spaces
Best for: Chipping in tight, hard-to-reach spots
Pros
- Swan neck handle, long nozzle
- Rubber buffer retainer
- Lock spring retainer
Cons
- Weight not listed
- No chisel included
The Ingersoll Rand 2A2SA 2″ Stroke Air Chipping Hammer is part of the A Series. The listing highlights a swan neck handle and long nozzle for reaching into tight spaces, a rubber buffer retainer and threaded barrels for longer life, and lock spring retainers that keep the steel in place. It lists up to 2,300 BPM and a round head style.
The weight is not listed, and only the hammer is included. The description promotes a strong power-to-weight ratio for construction and demolition. Choose the 2A2SA over the 2DA2SA if reaching awkward spots matters more than the D-handle grip.
How to Choose the Right Ingersoll Rand Air Hammer
Stroke length: Longer strokes (119MAXK at 3 1/2 in., 135MAX at 3 in.) hit harder for stuck parts. Shorter, faster hammers like the 114GCQ or 115K suit quick exhaust and trim work.
Kit or bare tool: The 119MAXK, 114GCQ and 115K include chisels. The 135MAX, 2DA2SA and 2A2SA list only the hammer, so budget for bits.
Weight and duty: The 115K is the lightest at 2.6 lbs. The chipping hammers are much heavier and built for demolition, not car repairs.
Air supply: Every model needs a compressor, which is not included. Make sure your compressor can keep up with continuous use; a small portable unit like the one in our portable air compressor review may struggle with long sessions.
FAQ
Which Ingersoll Rand air hammer should a beginner buy?
The 115K is light and includes five chisels, while the 114GCQ adds anti-vibration features and a 3-piece chisel set. Both suit home mechanics starting with exhaust work.
What does a longer stroke do on an air hammer?
A longer stroke lets the piston travel farther, so each hit is more forceful. It usually comes with fewer blows per minute than a short-stroke hammer.
Does the 135MAX come with chisels?
The listing includes the quick-change retainer but lists only the 135MAX hammer as the included component, so chisels are not stated.
Is a chipping hammer the same as an air hammer?
Both use air to drive a chisel, but chipping hammers like the 2DA2SA and 2A2SA are larger tools aimed at demolition and metal removal rather than auto repair.
Do these air hammers include a compressor?
No. The 119MAXK listing states that the air compressor is not included, and none of the others list one.


