Snow Plow Add-Ons for John Deere Tractors and Gators
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
John Deere lawn tractors and Gator utility vehicles are some of the most popular machines people already own when winter arrives, so it makes sense that many owners search for a snow plow for John Deere equipment rather than buying a separate machine. One honest note before we begin: every product on this page is made by an aftermarket company for John Deere machines, not by John Deere itself. Push Industries, MOTOQUEEN, AUTOVIC, Foruly, Extreme Max and Kimpex build these parts to fit specific Deere models, and some replace original Deere part numbers.
These six add-ons fall into three jobs: an electric lift that raises a snow blower from the dash, wear edges that protect the bottom of a front blade, and mounts or brackets that attach a plow to a tractor or Gator. Below we explain each term simply, list exactly which machines each listing names, and help you avoid the most common mistake, which is buying a part for the wrong model.
John Deere Snow Plow Parts Compared
| Product | Part type | Listed fitment | Material |
|---|---|---|---|
| Push Industries 118.555 Electric Lift Kit | Electric lift system | S100 to S240 tractors built after 3/2/2014 with 700AM 44-inch blower (2018 on) | Powder-coated steel |
| 1/2″ Poly Cutting Edge Scraper | Scraper bar (cutting edge) | John Deere 54-inch front blade, replaces M75679 | 1/2-inch polyethylene |
| Snowplow Mounting Brackets Front | Blade mounting brackets (pair) | John Deere 46-inch front blade, replaces GXH24760/GXH24761 | Powder-coated alloy steel |
| UHMW Wear Blade for 44″ John Deere | Wear blade (cutting edge) | John Deere 44-inch front plow | 1/2-inch UHMW polyethylene |
| Extreme Max 5600.3367 UTV Plow Mount | UTV plow mount kit | John Deere Gator HPX, XUV and S4 series | Grade 50 steel, powder-coated |
| Click N GO CNG 2 or 1.5 Bracket | UTV plow bracket | John Deere Gator RSX850i (2013 to 2015 listed) | Alloy steel |
Push Industries 118.555 Electric Lift Kit for Tractor Snow Blowers
Push Industries
Push Industries 118.555 Electric Lift Kit for John Deere use with 100/S240 Series Tractor for 700AM Snow Blower (Replaces LP68150) – A Real Shoulder Saver
Price and specifications are read from the Amazon product page and can change.
Push Industries 118.555 Electric Lift Kit
Best for: S100 or S240 owners with 700AM blower
Pros
- Dash toggle switch lift
- 4-inch lift height
- Powder-coated steel
Cons
- Very narrow fitment list
The Push Industries 118.555 Electric Lift Kit replaces the hand lever you would normally pull to raise and lower a front snow blower. Instead, an electric actuator (a motor-driven arm) does the lifting, and you control it with a toggle switch on the dash. The listing calls it a commercial grade actuator with a lift height of 4 inches, and it runs on 12V power from the tractor. It replaces the original Deere part LP68150.
Fitment is very specific. The listing says it works only on S100, S110, S120, S130, S140, S160, S170, S180 and S240 lawn tractors built after March 2, 2014, and only with the 700AM 44-inch snow blower from model year 2018 onward. It also mentions controllable down pressure, which helps the blower scrape hard-packed snow, powder-coated steel parts and installation with basic hand tools. Although the article topic is plows, note that this kit is for a snow blower attachment, not a blade.
This is a thoughtful gift for a Deere owner who already runs that exact blower and is tired of cranking a lever in the cold. If their setup is a front blade rather than a blower, one of the parts below fits better.
1/2″ Poly Cutting Edge Scraper for the 54-Inch Blade
A cutting edge, also called a scraper bar, is the strip bolted along the bottom of a plow blade. It is the part that actually touches the pavement, so it wears out first and is meant to be replaced. The 1/2″ Poly Cutting Edge Scraper from MOTOQUEEN is a John Deere plow cutting edge for the 54-inch front mount snow blade, replacing the two-part M75679 scraper bar assembly.
It is made from 1/2-inch thick polyethylene, a tough plastic that the listing says wears longer than thinner standard edges. It comes as a two-piece assembly with carriage bolts and nuts, so you should not need to hunt for extra hardware. The listing repeats its warning to confirm your blade model, the M75679 part number, dimensions and assembly style before ordering, and so do we.
Choose this if the John Deere 54 inch blade scraper bar on your machine is chewed up or cracked. For a 44-inch blade, the Foruly wear blade below is the one to look at.
Snowplow Mounting Brackets Front for the 46-Inch Blade
Autovic
Snowplow Mounting Brackets Front for John Deere 46" Shovel/Snow Sweeper
Price and specifications are read from the Amazon product page and can change.
Snowplow Mounting Brackets Front for John
Best for: Mounting a 46-inch front blade
Pros
- Replaces GXH24760 and GXH24761
- Powder-coated alloy steel
- Set of two
Cons
- Not for D100-D130 series
The Snowplow Mounting Brackets Front for John Deere 46″ Shovel/Snow Sweeper from AUTOVIC are a pair of brackets that hold a front blade onto the tractor. The listing says they replace GXH24760 and GXH24761 for use with the BG20020 blade, and it clearly states they do not fit the D100, D110, D120 or D130 series.
They are made from alloy steel with a black powder-coated finish meant to resist rust, and the listing says they install without complicated tools. It does not specify which tractor models beyond the blade and part numbers, so compare your original part numbers carefully. This is the snow plow bracket for John Deere owners whose original brackets are bent or rusted through.
These suit someone who already owns the 46-inch blade and needs to replace worn mounts. If you are mounting a plow on a Gator instead, skip to the Extreme Max or Click N Go options.
UHMW Wear Blade for 44″ John Deere Front Plows
Foruly
Foruly UHMW Wear Blade for 44" John Deere Front Snow Plow, 1/2" Thic
Price and specifications are read from the Amazon product page and can change.
UHMW Wear Blade for 44″ John
Best for: Protecting a 44-inch front plow
Pros
- 1/2-inch UHMW thickness
- Hardware included
- Pre-drilled holes
Cons
- Model fit stated only broadly
The UHMW Wear Blade for 44″ John Deere Front Snow Plow from Foruly is another replacement edge, this time for the 44-inch front-mount plow. UHMW stands for ultra-high molecular weight polyethylene, a very slippery, abrasion-resistant plastic. The listing says it is 1/2-inch thick, thicker than standard 3/8-inch or original edges, and that its low friction helps it scrape smoothly and resist ice buildup.
It acts as a sacrificial barrier, meaning it wears away so the steel blade does not. The kit includes carriage bolts, nuts and washers, and pre-drilled holes line up for a bolt-on swap that the listing says takes under 30 minutes. The listing says it fits the 44-inch plow on many X300, X500 and 1-Series tractors, but it does not give a full model list, so check your blade before buying.
This suits owners of the 44-inch plow who want a thick, long-lasting edge. The MOTOQUEEN scraper is the pick for the 54-inch blade.
Extreme Max 5600.3367 UTV Plow Mount for John Deere Gators
Extreme Max
Extreme Max 5600.3367 UTV Plow Mount Kit for John Deere Gator XUV Side by Side
Price and specifications are read from the Amazon product page and can change.
Extreme Max 5600.3367 UTV Plow Mount
Best for: Gator owners adding a UTV plow
Pros
- Grade 50 steel
- Fits current and round-tube systems
- Hardware and instructions
Cons
- Plow blade sold separately
If you want to add a plow to a utility vehicle, the Extreme Max 5600.3367 UTV Plow Mount is a John Deere Gator plow mount kit that bolts to the lower front of the vehicle. The listing says it is compatible with major Gator models including HPX, XUV and S4 series. It is made from 3/16-inch and 1/4-inch Grade 50 steel that is bead-blasted and powder-coated.
A mount is only the connection point; the blade and push tube are separate. The listing says this mount works with many current UTV plow tube systems and older round-tube systems, and it connects with two standard 5/8-inch hitch pins. All hardware and instructions are included, and the kit weighs about 11 pounds.
This is the right John Deere snow plow mount for Gator owners who already have, or plan to buy, a compatible plow system. For a quick-attach setup built around one plow system, see the Click N Go below.
Click N GO CNG 2 or 1.5 Snow Plow Bracket for Quick Hitching
Best for: Gator RSX850i drivers wanting quick hitch
Pros
- Double pivot for lift
- Pedal angle change
- Compact mount
Cons
- Track kits need extension part
The Click N GO CNG 2 or 1.5 Snow Plow Bracket from Kimpex is part of the Click N Go2 UTV plow system. It is a mid-mount bracket, meaning it attaches under the middle of the vehicle. Its double pivot point increases lift height, a quick hitch system makes mounting easy, and the driver can use pedals to release the latch and change the plow angle.
The listing names the John Deere Gator RSX850i for 2013 to 2015, including the 2014 Midnight Black Special Edition; the rest of the fitment list is cut off, so confirm your model. It also notes that machines with track kits need a frame extension, part 4501-0717. The compact mount is designed to reduce lost ground clearance.
Pick this for an RSX850i owner who wants to hook up and unhook a plow quickly. For HPX, XUV or S4 Gators, the Extreme Max mount is the clearer match.
How to Choose the Right John Deere Plow Parts
First, identify your machine exactly: the model name and, for tractors, the build date. The Push Industries kit, for example, only fits tractors built after 3/2/2014. Next, measure your blade width, since the edges here come in 44-inch and 54-inch versions and the brackets are for 46-inch blades.
Then compare part numbers. Several listings name the original Deere part they replace, such as M75679, GXH24760 and LP68150. Matching that number on your old part is the most reliable way to confirm fit.
Think about the job. Worn edge scraping unevenly? Get a cutting edge. Bent mount? Replace the brackets. Starting from scratch on a Gator? Begin with a mount kit. For small paths where a tractor is overkill, a battery-powered snow shovel may be enough.
Finally, remember that all six are third-party parts. They are built to fit John Deere machines, but they are not Deere-branded, and warranty support comes from each maker. If you would rather skip plowing altogether, our guide to a cordless snow blower covers a simpler route.
FAQ
Are these genuine John Deere parts?
No. Each is an aftermarket part made to fit John Deere equipment, and several replace original Deere part numbers.
What is the difference between a cutting edge and a wear blade?
They do the same job: a replaceable strip on the bottom of the plow that takes the wear. Here, the MOTOQUEEN edge fits 54-inch blades and the Foruly UHMW blade fits 44-inch plows.
Does the Push Industries kit work with a front blade?
The listing says it is for the 700AM 44-inch snow blower on specific S100 and S240 tractors, not for a blade.
Which plow mount fits my Gator?
The Extreme Max kit lists HPX, XUV and S4 models, while the Click N Go bracket lists the RSX850i from 2013 to 2015.
Do these parts come with hardware?
The scraper, UHMW wear blade and Extreme Max mount list included bolts or hardware. The bracket listings do not specify hardware.
