M MINGLE Pressure Washer Hoses: Length, Diameter and Fittings

The M MINGLE Pressure Washer Hose 50 FT x 1/4 in. is the most common replacement choice in this lineup. Fifty feet gives you room to walk around a car or across a driveway without dragging the machine behind you. The 1/4 in. size refers to the hose’s inner diameter, the channel the water flows through. Many electric and smaller gas pressure washers ship with a 1/4 in. hose, so this is usually a like-for-like swap.

It is rated for a maximum working pressure of 3600 PSI and water up to 140°F. PSI, or pounds per square inch, is the pressure the hose can safely handle; the hose rating should always be equal to or higher than your pressure washer’s rating. The listing describes the rubber hose as weather and abrasion resistant, non-marking so it will not leave streaks on floors or paint, and not easily kinked. In the box you get the hose, one M22 14mm male-to-male coupler and two adapter sets that convert between M22 14mm and 3/8 in. quick-connect fittings. That lets you connect it to a gun or machine with either thread or quick-connect ends, or join it to another hose.

The listing warns clearly that it does not fit M22 15mm fittings, and it is not a garden hose for faucets. This m22 14mm pressure washer hose suits most homeowners washing cars, patios, windows and siding. If your house is large or your driveway is long, the 100 ft. version adds reach.

The M MINGLE Pressure Washer Hose 100 FT x 1/4 in. doubles the reach of the 50 ft. model while keeping the same 3600 PSI rating and 140°F maximum water temperature. The listing lists a nominal wall thickness of more than 3 millimeters and an outside diameter of 15 millimeters; the 1/4 in. in the title describes the inside channel.

The package matches the 50 ft. hose: one M22 14mm male-to-male coupler and two adapter sets to switch between M22 14mm and 3/8 in. quick-connect. The hose is described as weather and abrasion resistant, non-marking, easy to roll up and designed never to kink permanently. It is listed for cars, motorcycles, floors, windows, driveways, roofs, pools and siding, for both household and commercial use.

This M MINGLE 100 ft hose suits people with long driveways, two-story homes or roofs where the machine has to stay on the ground. A longer hose is heavier to drag and takes more space to store, so pairing it with the hose reel below makes sense. It does not fit M22 15mm fittings.

The M MINGLE Pressure Washer Hose 50 FT x 3/8 in. is the heavy-duty option. A 3/8 in. inner diameter moves more water with less restriction than a 1/4 in. hose, which matters for stronger gas machines. This hose supports 2.5 to 5 GPM (gallons per minute) of flow, a common range for bigger pressure washers.

It is built from rubber with high-tensile wire braided layers and rated at 4000 PSI working pressure with a 16000 PSI burst pressure. Burst pressure is the point at which the hose would fail, so the working pressure is the number to match to your machine; the spec table lists 16000 PSI as the maximum, which is the burst figure. It handles hot and cold water up to 212°F and is described as fitting both gas and electric pressure washers. A flexible anti-bend core resists kinks, joints are reinforced, and the outer layer is non-marking. It weighs 5.97 kg, noticeably more than the 1/4 in. hoses.

In the box you get the hose, one M22 14mm female to 3/8 in. male plug and one M22 14mm female to 3/8 in. female socket, giving tool-free quick-connect use. Unlike the 1/4 in. kits, no male-to-male coupler is listed. This M MINGLE 3/8 inch hose suits owners of powerful gas machines, hot water units or anyone who wants the toughest hose here. It does not fit M22 15mm fittings.

The M MINGLE Pressure Washer Hose 50FT x 1/4 in. with Stainless Steel M22 14mm Adapter takes the standard 50 ft. hose and upgrades the fittings. The M22 adapters and couplers are stainless steel, which resists rust better than plain metal and makes connections secure and quick to attach and detach.

The hose itself shares the 3600 PSI working pressure, 140°F maximum temperature, weather and abrasion resistance, non-marking surface and kink resistance of the standard 50 ft. model. The package includes the hose, one M22 14mm male-to-male coupler and two adapter sets for M22 14mm and 3/8 in. quick-connect. The spec table lists the material as stainless steel and a weight of 2250 g; the stainless steel refers to the adapters, and the listing does not separately name the hose material.

This version suits anyone who has had adapters corrode or seize in the past, or who stores the washer in a damp shed or garage. It does not fit M22 15mm fittings. If adapters are not a concern, the standard 50 ft. hose covers the same jobs.

The M MINGLE Pressure Washer Hose Reel (model PW79-4) is a manual crank reel that holds up to 100 ft. of 3/8 in. hose or 150 ft. of 1/4 in. hose. The hose is not included, so pair it with one of the hoses above. It is built from a heavy-duty steel frame with corrosion-resistant powder coating and stainless steel parts.

It is rated for 4000 PSI and 176°F. The connection is 3/8 in. NPT, a standard pipe thread, and it works with M22 14mm hoses through a matching adapter. A swivel arm guides the hose as you wind it, a black fixer stops the reel from spinning during use, and a hose buckle secures the end. It can mount to a pressure washer frame with the fixed iron panel and parts, and four quick-release pins let you remove it. It is listed for wall mounting, measures 13 x 13 x 6.5 inches and weighs 14 pounds. M MINGLE asks you to check every connection is secure before starting.

This m mingle hose reel suits anyone with a 100 ft. hose or a machine they use often. If you would rather hang the whole washer, a wall mount for a pressure washer is another tidy storage idea.