Skip to content
BuyShelf.net One clear way in to every guide

Tools & Garden

Can a Mini Compressor Run Your Nail Gun? DEWALT Battery Options

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

DEWALT’s 20V MAX batteries power hundreds of cordless tools, so it is natural to wonder whether one of those batteries can also run a small air compressor for a nail gun. A mini compressor for nail gun DEWALT setups is possible, but it depends on two numbers: PSI, the pressure the compressor can reach, and tank size, the amount of stored air that keeps a nailer firing between pump cycles.

An honest note first: only the storage case in this list is built around a genuine DEWALT tool, and even that case is made by Turokacase; the compressors are third-party units built for DEWALT 20V batteries, the tire inflator has no tank at all, and the pocket air gun is a blow-gun accessory, so the models differ mostly in tank size (from none to 1 gallon) and whether they can realistically drive brad nails or only inflate.

DEWALT Battery Compressors and Accessories Compared

Model Type Max Pressure Tank Nail Gun Use
Pocket Air Gun Industrial Style Blow gun accessory Not listed None No
Cordless Air Compressor for Dewalt 20V Compressor 116 PSI 0.26 gallon Brad and roofing nailers named
160 PSI Tire Inflator Compatible Tire inflator 160 PSI None No
Cordless Air Compressor Compatible with Dewalt Compressor 8 bar (about 116 PSI) 0.26 gallon Not listed
Cordless Air Compressor for DEWALT 20V Compressor 120 PSI (spec says 150) 1 gallon Brad and roofing nailers named
Air Compressor Hard Storage Case Case for DCC020IB Not applicable Not applicable No

Pocket Air Gun Industrial Style for Quick Bench Cleanup


Pocket Air Gun Industrial Style

Dewalt

Pocket Air Gun Industrial Style

8.2/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

Pocket Air Gun Industrial Style

Best for: Blowing dust off benches and tools

Pros

  • Two-finger flow control
  • Easy grip with oily hands
  • Tiny, pocket sized

Cons

  • Needs a compressor to work
  • Very thin listing

The Pocket Air Gun Industrial Style is a small blow gun, not a compressor. It plugs into an air hose and lets you blast sawdust off a workbench or out of a tool. The description says two fingers control the flow, from full air to complete shut-off, and the grip stays secure even with oily or greasy fingers.

The listing is very thin. It names the manufacturer as MAT with part number DXCM035-0043, lists a weight of 1.13 ounces and describes it as industrial style, which refers to the common industrial quick-connect fitting type. It does not specify the thread or fitting size, the pressure rating or a brand beyond that manufacturer line, so match the fitting to your hose before ordering.

This suits someone who already has a compressor and wants a pocket-sized cleanup tool. It cannot make air on its own. If you need a blow gun and a compressor together, the Fogera 1 gallon kit below includes one.

Cordless Air Compressor for Dewalt 20V for Light Brad Nailing

Best for: Most nailing use on DEWALT batteries

Pros

  • Largest 1 gallon tank
  • 2600 RPM brushless motor
  • Hose, blow gun and chuck included
  • Brad and roofing nailers named

Cons

  • Heaviest at 11 lbs
  • Max PSI listed two ways

Cordless Air Compressor Compatible with Dewalt 20V Battery, 0.26-Gallon Capacity, Oil-Free, Ultra Quiet Portable Air Compressor, 65 dB Noise Level Electric Air Compressor

High score Our score: 9.6/10

RexLeLXB

Cordless Air Compressor Compatible with Dewalt 20V Battery, 0.26-Gallon Capacity, Oil-Free, Ultra Quiet Portable Air Compressor, 65 dB Noise Level Electric Air Compressor

9.6/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

Cordless Air Compressor Compatible with Dewalt

Best for: Quiet inflating and light air jobs

Pros

  • 26 gallon tank
  • 8 bar max pressure
  • Oil-free, 65 dB
  • Long battery model list

Cons

  • Listed for tire inflation
  • Sparse performance details
Cordless Air Compressor for Dewalt 20V
Cordless Air Compressor for Dewalt 20V

Best for: Light brad nailing and trim jobs

Pros

  • 116 PSI max
  • 140W brushless motor
  • Quiet 65 dB
  • Oil-free pump

Cons

  • Small 0.26 gallon tank
  • Battery not included

The Cordless Air Compressor for Dewalt 20V from LouSdZoke is a tool-only compressor that accepts DEWALT 20V batteries such as DCB200, DCB201, DCB203, DCB206 and DCB207. It has a 0.26 gallon tank, a 140W brushless motor at up to 2,000 RPM and an oil-free pump, meaning no oil to check or change.

It reaches up to 116 PSI, which the listing says is enough for brad nailers and roofing nailers. It runs at 65 dB, roughly as loud as a normal conversation, which makes it one of the quiet, oil-free air compressor options here. It includes overvoltage and overheat protection plus a safety valve. The listing gives both 8.16 and 7.9 pounds as its weight.

This suits hobbyists nailing baseboard trim or small crafts with a brad nailer, which uses little air per shot. The small tank means the motor will cycle often during fast nailing, so for longer sessions the 1 gallon Fogera is the stronger choice.

160 PSI Tire Inflator Compatible for Tires, Not Nailers


160 PSI Tire Inflator Compatible with Dewalt 20V Max Battery

Byczone

160 PSI Tire Inflator Compatible with Dewalt 20V Max Battery

8.4/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

160 PSI Tire Inflator Compatible

Best for: Car and SUV tire top-ups

Pros

  • 160 PSI max
  • Auto shut-off at set pressure
  • Built-in flashlight with SOS
  • Accepts 18V and 20V packs

Cons

  • No tank, can’t run nailers
  • Tire inflation only

The 160 PSI Tire Inflator Compatible from byczone is a cordless tire pump. It takes DEWALT 18V and 20V batteries, including DCB181, DCB182, DCB200, DCB203, DCB204, DCB205 and DCB206. A brushless motor with a 25mm cylinder moves up to 30 liters of air a minute, and the listing says it inflates a 195/65/R15 car tire in under 4 minutes.

You set a target pressure and it shuts off automatically, with accuracy of plus or minus 0.5 PSI to prevent overinflation. It reaches 160 PSI, runs for 20 minutes continuously, has a built-in flashlight with an SOS mode and uses a freeze- and heat-resistant nylon braided body.

A high PSI number does not make it a nail gun compressor: it has no tank to store air, so it cannot keep a nailer supplied. It suits drivers who want a DEWALT 20V tire inflator for the trunk or garage. For nailing, choose a tank compressor.

Cordless Air Compressor Compatible with Dewalt for Quiet Inflation Jobs

The Cordless Air Compressor Compatible with Dewalt from RexLeLXB looks similar to the LouSdZoke model on paper: a 0.26 gallon tank, an oil-free pump, 65 dB operation and overvoltage and overheat protection. It lists a wide range of DEWALT batteries, from DCB180 and DCB181 to DCB206 and DCB207, and comes with a tool kit.

Maximum pressure is given as 8 bar, which works out to about 116 PSI. The listing’s recommended use is tire inflation, and it does not mention nail guns, motor wattage, airflow or weight, so it is hard to judge nailing performance from the listing alone.

This suits someone who mostly inflates tires, balls and air mattresses and wants a quiet, small tank on hand. If nailing is your main goal, the LouSdZoke and Fogera listings explicitly name brad nailers.

Cordless Air Compressor for DEWALT 20V for the Most Nailing Headroom

The Cordless Air Compressor for DEWALT 20V from Fogera has the biggest tank here at 1 gallon, four times the 0.26 gallon models. It uses a brushless motor at 2,600 RPM with an oil-free pump, heat dissipation and overload protection, and it accepts DEWALT 20V MAX batteries including DCB200, DCB203, DCB205, DCB210, DCB230 and DCB240.

The feature list says 120 PSI maximum, while the spec sheet says 150, so expect around 120 PSI. It names nail guns, roofing nailers, brad nailers, airbrushes and blow guns among its uses. The kit includes a 9.8-foot air hose, a blow gun, an air chuck, three nozzles, an inflation needle and sealing tape. It weighs 11 lbs.

This is the best fit here for someone who wants a portable air compressor for nail gun work on small projects without a cord. For larger jobs, see our guide to a DEWALT cordless compressor for comparison.

Air Compressor Hard Storage Case for the DEWALT DCC020IB

Best for: DCC020IB owners wanting organized storage

Pros

  • Custom foam for DCC020IB
  • Holds 2 batteries and charger
  • IP67 waterproof shell

Cons

  • Case only, no inflator
  • Fits one specific model

The Air Compressor Hard Storage Case from Turokacase is a hard case with custom foam for the genuine DEWALT 20V MAX Tire Inflator, model DCC020IB. It is case only; the inflator, battery and charger are not included.

The foam holds one DCC020IB, two 20V batteries from 3.0 to 8.0 Ah (one attached to the inflator) and one charger. The shell is new polypropylene resin, rated IP67 waterproof and dustproof, shockproof and lockable, with a 365-day warranty.

This suits anyone who already owns the DCC020IB and wants it organized in a truck or garage. If you are still choosing, our guide to the DEWALT cordless tire inflator explains that tool.

How to Choose a Compressor for Your DEWALT Nail Gun

First, check your nailer’s needs. Brad nailers usually run around 70 to 120 PSI and use little air per nail, so small tanks can handle them. Framing nailers need much more air than any compressor here provides.

Second, look at tank size. A tank stores air so the nailer can fire repeatedly. Tire inflators have none; 0.26 gallon tanks suit slow trim work; the 1 gallon tank gives more steady nailing.

Third, count batteries. Compressors draw heavy current, so a 4.0Ah or larger DEWALT 20V battery gives longer runtime. All of these are tool only.

Finally, remember the extras. You need the right hose and fittings. The Fogera includes a hose; other models may need one.

FAQ

Can a cordless air compressor for DEWALT 20V run a brad nailer?

The LouSdZoke and Fogera listings name brad nailers. The 1 gallon Fogera gives the most headroom.

Are these made by DEWALT?

No. The compressors and inflator are third-party tools that use DEWALT batteries. The case is also third-party, built for DEWALT’s DCC020IB.

Why can’t a tire inflator run a nail gun?

It has no tank to store air and is built for slow, steady inflation rather than bursts.

What does oil-free mean?

The pump uses sealed, lubricated parts, so there is no oil to add or change.

Do these include batteries?

No. The compressor listings say tool only; you use your own DEWALT batteries.

Which is quietest?

The two 0.26 gallon compressors list 65 dB. The Fogera does not give a noise level.

Related reading: dewalt brad nailer koramontxy.

More in Tools & Garden