Wall Mounts for Ring Cameras and Solar Panels: Official or Compatible?
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Ring is best known for video doorbells and battery security cameras, and its solar panels keep those cameras charged without climbing a ladder every few weeks. The tricky part for first-time installers is placement: the camera wants a good view, while the panel wants direct sun. A 2-in-1 mount solves that by holding both on one bracket, so you drill one set of holes instead of two.
The key thing to know before you buy: of the six mounts below, only the All-New Ring Pole and Wall Mount is made by Ring. The other five are third-party mounts from Aothaigro, iTODOS, Holicfun and BECOMFY that are sold as compatible with Ring cameras and panels, and they differ mainly in whether they fit poles as well as walls, how far the panel arm reaches and which adapters come in the box.
Ring Camera and Solar Panel Mounts Compared
| Model | Maker | Install Surface | Adjustment | Warranty |
|---|---|---|---|---|
| All-New Ring Pole and Wall Mount | Ring | Poles and walls | Camera and panel adjust separately | Not listed |
| Wall Mount for Cameras and Solar (Aothaigro OBK-W) | Aothaigro | Flat surfaces | 360° camera, 180° panel tilt | 1 year |
| Universal 2-in-1 Wall Mount for Camera | iTODOS | Walls | 360° camera, 180° panel arm | 1 year |
| Holicfun 2-in-1 Wall Mount for Outdoor | Holicfun | Flat surfaces | Adjustable angles, degrees not listed | 1 year |
| Wall Mount for Cameras and Solar (Aothaigro USOBKB) | Aothaigro | Flat surfaces | 360° camera, 180° panel tilt | 1 year |
| BECOMFY 2-in-1 Wall and Pole Mount | BECOMFY | Poles and walls | 360° swivel, 90° tilt | Not listed |
All-New Ring Pole and Wall Mount as the Official Choice
Best for: Flat walls, alternate version of same kit
Pros
- 360° camera rotation
- Extending panel arm
- Screwdriver included
- 1-year warranty
Cons
- Third-party, not made by Ring
- Near-duplicate of another listing
Aothaigro
Wall Mount for Cameras and Solar Panels,2-in-1 Mount for Ring,Blink
Price and specifications are read from the Amazon product page and can change.
Wall Mount for Cameras and Solar
Best for: Flat walls, all-in-one install kit
Pros
- 360° camera rotation
- Panel arm extends 5.9-8.7 in
- Screwdriver and cable tie included
- 1-year warranty
Cons
- Third-party, not made by Ring
- Temperature spec contains an error
Best for: Buyers wanting the genuine Ring mount
Pros
- Made by Ring
- Mounts on poles or walls
- Adjusts camera and panel separately
- Weather-resistant
Cons
- Hardware contents not listed
- Full compatibility list cut off
The All-New Ring Pole and Wall Mount is the genuine Ring accessory in this list. It holds a Ring camera and a Ring solar panel together and is designed for both walls and round surfaces such as gutter downspouts, fence posts, pillars and light poles. That pole option is handy for renters or anyone who does not want to drill into siding.
The listing calls it weather-resistant and fully adjustable, so you can angle the camera for the view you want and tilt the panel toward the sun independently. It names compatibility with Ring models including Spotlight Cam Plus Battery and Solar, Spotlight Cam Pro Battery and Solar, Outdoor Cam Plus Battery and Solar, and Stick Up Cam Pro Battery and Solar; the rest of the list is cut off, so check your model on the product page. Cameras and panels are sold separately, and the listing does not specify what hardware is included or the warranty.
This is the pick for anyone who wants the fit and look Ring intended, or for a gift that goes with a new Ring camera. If you only need a flat-wall mount with a screwdriver in the box, the third-party options cover that. Our guide to the Ring camera solar panel explains which panel to pair with your camera.
Wall Mount for Cameras and Solar by Aothaigro (OBK-W) for Complete Kits
The Wall Mount for Cameras and Solar panels, model OBK-W, is a third-party mount from Aothaigro. It mounts a Ring camera and solar panel on any flat surface using one set of holes, and lists compatibility with Ring Stick Up Cam and Pro, Spotlight Cam, Plus and Pro, the 2.4W first-gen panel, the 4W second-gen panel and the 1.9W small panel. A standard 1/4-inch screw thread also fits many other cameras with the same connector.
The camera rotates 360 degrees, the panel tilts 180 degrees and its arm extends from 5.9 to 8.7 inches to reach more sunlight. It is made of metal and ABS plastic (the spec table says steel and PVC) and weighs 0.2 kg. The box holds the mount, two screw sets, a nylon braided cable tie, a Phillips screwdriver and a manual, and it has a 1-year warranty. One listing error: it gives the operating range as -30°C to 70°C but converts that to 22°F; -30°C is actually -22°F.
It suits first-timers who want everything, including the screwdriver, in one box. For pole installs, look at the Ring or BECOMFY mounts instead.
Universal 2-in-1 Wall Mount for Camera by iTODOS for Tight Spaces
iTODOS
Universal 2-in-1 Wall Mount for Camera and Solar Panel, Compatible with Ring Stick Up Cam/Spotlight Cam Battery/Plus/Pro, Blink, Arlo, Wyze, 360° Adjustable, Easy Install Kit
Price and specifications are read from the Amazon product page and can change.
Universal 2-in-1 Wall Mount for Camera
Best for: Porches and garages with tight wall space
Pros
- Lists Ring cams and panels by name
- Extending 180° panel arm
- Wall anchors included
- 1-year warranty
Cons
- Third-party, not made by Ring
- Weight not listed
The Universal 2-in-1 Wall Mount for Camera and solar panel is an iTODOS product. It names a long list of Ring compatibility, including Stick Up Cam Battery, Solar, Pro Battery and Pro Solar, Spotlight Cam Battery, Solar, Plus and Pro versions, first- and second-gen solar panels, and the Small and Super Solar Panels, all through a standard 1/4-inch thread.
The camera rotates a full 360 degrees and the panel arm rotates 180 degrees while extending from 5.9 to 8.7 inches, which helps you angle around eaves or gutters. It is built from rust-resistant metal and impact-resistant ABS and is rated from -22°F to 158°F. The kit includes stainless steel screws and wall anchors, and the listing says installation takes under 5 minutes. It has a 1-year warranty; weight is not listed.
It suits porches, garages and other spots with limited wall space. Holders of a Spotlight Cam Pro or Plus who want a Ring-specific adapter should compare the Holicfun kit.
Holicfun 2-in-1 Wall Mount for Outdoor Cameras with Ring Adapters
Holicfun
Holicfun 2-in-1 Wall Mount for Outdoor Cameras and Solar Panels, White
Price and specifications are read from the Amazon product page and can change.
Holicfun 2-in-1 Wall Mount for Outdoor
Best for: Spotlight Cam Pro or Plus owners
Pros
- Ring-specific adapters included
- Screw covers and cable straps
- One drilling location
Cons
- Third-party, not made by Ring
- Mostly plastic body
The Holicfun 2-in-1 Wall Mount for Outdoor cameras and solar panels is a third-party mount that stands out for its adapters. The box includes a Ring Spotlight Cam Pro/Plus adapter and a Ring Solar Panel adapter, plus mounting screws, wall anchors, screw covers, a screwdriver and cable management straps.
It uses universal 1/4-20 screws, requires only one drilling location, and lets you adjust both the camera and panel angles, though it does not list specific rotation degrees. It is made from ABS plastic with stainless steel screw connectors, comes in white and carries a one-year warranty.
It suits owners of a Spotlight Cam Pro or Plus who want adapters made for that shape. Buyers who prefer a metal body can look at the Aothaigro or iTODOS mounts.
Wall Mount for Cameras and Solar by Aothaigro (USOBKB) as an Alternate Version
The Wall Mount for Cameras and Solar panels, model USOBKB, is a second Aothaigro listing with the same feature text as the OBK-W: one set of holes, 360° camera rotation, 180° panel tilt, a 5.9 to 8.7 inch extending arm, 1/4-inch thread and the same Ring compatibility list.
The differences are in the specifications. This one lists ABS and metal as materials, weighs 0.24 kg and has a different model number. The box contents are the same: the mount, two screw sets, a nylon braided cable tie, a Phillips screwdriver and a manual, with a 1-year warranty. The same Fahrenheit conversion error appears here too. The listing does not explain what else separates the two models, so compare color and photos on the product pages.
It suits the same flat-wall buyer as the OBK-W. Pick whichever version matches your siding color or is in stock.
BECOMFY 2-in-1 Wall and Pole Mount for No-Drill Installs
Best for: No-drill poles, fences and downspouts
Pros
- Pole or wall install
- 360° swivel, 90° tilt
- Powder-coated finish
Cons
- Third-party, not made by Ring
- Warranty not listed
The BECOMFY 2-in-1 Wall and Pole Mount is the third-party option closest to Ring’s own mount in purpose. It can attach without drilling to gutter downspouts, fence posts or light poles, or go on a wall with screws for a permanent setup.
The listing names compatibility with Ring Stick Up Cam (all generations), Spotlight Cam Pro, Plus and Battery, Outdoor Cam Plus and all Ring solar panels, plus a 1/4-inch screw for other brands. The camera swivels 360 degrees and tilts 90 degrees and locks in place against wind. It has a powder-coated white finish, weighs 0.24 kg and includes the needed hardware. It encourages mounting high to deter tampering. Warranty is not listed.
It suits renters and anyone mounting on a pole. For a flat wall only, the simpler wall mounts do the job.
How to Choose the Right Ring Camera and Solar Panel Mount
Official or compatible. The Ring Pole and Wall Mount is made by Ring. The other five are third-party mounts that claim compatibility; they are not Ring products, so check your exact camera and panel model against each listing.
Wall or pole. For a pole, post or downspout, choose the Ring mount or BECOMFY. The others are designed for flat surfaces.
Sun versus view. Panels need several hours of direct sun. The extending 5.9 to 8.7 inch arms on the Aothaigro and iTODOS mounts help reach past shadows. For larger panel setups on sheds or decks, see our guide to a strut channel solar panel mount.
Install tips. Mount the camera about 7 to 9 feet high, face the panel south in the Northern Hemisphere, and test the camera view in the app before tightening everything.
FAQ
Does Ring make a mount for a camera and solar panel together?
Yes. The All-New Ring Pole and Wall Mount holds a Ring camera and solar panel together on poles or walls.
Are third-party 2-in-1 mounts safe for Ring cameras?
They are sold as compatible and use standard threads or adapters, but they are not made or supported by Ring. Check your model against each listing.
Do these mounts include the camera or solar panel?
No. Every listing that mentions it says cameras and solar panels are sold separately.
Which mount works without drilling?
The Ring Pole and Wall Mount and the BECOMFY mount both attach to poles, posts and downspouts without drilling.
What is the difference between the two Aothaigro mounts?
They share the same features. The listings differ in model number, listed materials and a small weight difference.
