Printing ASA on a Bambu Lab: Filaments and Helpers to Choose
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Bambu Lab is known for fast, beginner-friendly 3D printers with an optional AMS (Automatic Material System) that feeds and switches spools for you. Many owners start with PLA, the easy default plastic, and then look at ASA when they want parts that live outdoors, such as garden signs, mailbox flags or car accessories, because ASA holds up to sunlight and heat far better than PLA.
This guide covers four products for printing ASA on a Bambu Lab: two ASA spools made by third-party brands (3DTOOLS and iSANGHU) for Bambu Lab printers, Bambu Lab’s AMS HT drying and feeding unit, and Bambu Lab’s own glue stick for build plate adhesion. They differ in role rather than competing directly: two are materials, and two help those materials print well.
Bambu Lab ASA Printing Options Compared
| Product | Made by | Role | Key detail | RFID |
|---|---|---|---|---|
| Bamboo Original 1.75MM ASA Filament UV | 3DTOOLS (third-party) | ASA filament, white | 1 kg, 1.75mm, reusable spool | Yes, listed |
| 3D Printer ASA Filament Marble 1KG | iSANGHU (third-party) | ASA filament, marble | Print 240-260C, bed 80-120C | Not listed |
| High-Performance 3D Printer by Bambu Lab (AMS HT) | Bambu Lab | Filament dryer and feeder | 85C drying, up to 24 colors | Yes, RFID sync |
| Bambu Lab Glue Stick for 3D | Bambu Lab | Bed adhesive | 21 g, formaldehyde-free | Not applicable |
Why ASA Is Worth Learning
ASA stands for acrylonitrile styrene acrylate. It is a cousin of ABS but formulated to resist ultraviolet light, so it does not turn brittle or fade as quickly in the sun. Both filament listings here say ASA keeps its shape at around 100C, well above PLA and above typical PETG, which is why it suits parts inside a hot car or next to a sunny window.
ASA has a few habits beginners should know. It prints hot, usually 240C to 260C at the nozzle, and wants a warm bed. It tends to warp, meaning corners lift as the plastic cools and shrinks, so an enclosed printer or enclosure helps keep the air warm. It also gives off a noticeable smell while printing, so good ventilation is wise. And like most plastics, it absorbs moisture from the air, which can cause stringing and bubbles, so dry storage matters.
Bamboo Original 1.75MM ASA Filament UV for AMS Convenience
3Dtools
3DTOOLS Bamboo Original 1.75MM ASA Filament UV Resistance and Highly Durable with Spool with RFID for Bambu Lab X1,P1 P2S,H2D AMS 1KG +/- 0.03mm (White 45100)
Price and specifications are read from the Amazon product page and can change.
Bamboo Original 1.75MM ASA Filament UV
Best for: AMS users wanting plain white ASA
Pros
- RFID tag for auto settings
- Reusable high-temp spool
- 75mm +/- 0.03mm
- Holds shape at 100C
Cons
- Third-party, not made by Bambu Lab
- Material field says PLA
The Bamboo Original 1.75MM ASA Filament UV spool is sold by 3DTOOLS, a third-party brand, despite a title that sounds like the printer maker; it is not made by Bambu Lab. It is a 1 kg spool of white ASA at 1.75mm with a tolerance of +/- 0.03mm, which describes how consistent the filament thickness is. The listing names compatibility with Bambu Lab X1, P1, P2S and H2D printers with the AMS.
Its main convenience is an RFID tag on the spool. The listing says the printing parameters are embedded in the tag and read by the AMS, so you load it and print without typing in settings. It also comes on a reusable high-temperature spool. The listing highlights UV, weather and aging resistance, high impact strength, and the ability to stay in shape at 100C, and suggests outdoor projects like plant signs, mailboxes and wind vanes. One contradiction: the specifications list the material type as polylactic acid (PLA), while the title and features describe ASA. Treat that field as an error, but confirm on the listing if in doubt.
This suits Bambu Lab owners with an AMS who want the easiest path to ASA. If you prefer a decorative color and do not need RFID, the marble spool is the alternative.
3D Printer ASA Filament Marble 1KG for Outdoor Parts with Style
iSANGHU
3D Printer ASA Filament Marble 1KG UV/Heat/Weather Resistant for Bambu Lab
Price and specifications are read from the Amazon product page and can change.
3D Printer ASA Filament Marble 1KG
Best for: Outdoor parts with a stone look
Pros
- Marble finish
- Dried 24 hours and vacuum sealed
- Clear print temperature tips
- Resists heat to 100C
Cons
- Third-party, not made by Bambu Lab
- No RFID listed
The 3D Printer ASA Filament Marble 1KG spool is made by iSANGHU, another third-party brand, and sold as compatible with Bambu printers. Its marble color gives prints a speckled stone look, which works well for planters, garden decor and house number signs.
The listing claims weathering and UV resistance ten times that of standard ABS, heat resistance up to 100C (212F), resistance to alcohol and cleaning agents, and strong impact toughness. It says the filament is dried for 24 hours before being vacuum sealed with desiccant. Most helpfully for beginners, it gives starting settings: print temperature 240C to 260C, bed 80C to 120C, fan at 0%, and print speed 30 to 70mm/s, with a suggestion to use an enclosure to prevent warping. The listing does not mention an RFID tag, so plan to set a filament profile yourself.
Choose it for decorative outdoor pieces and for its clear printing advice. For more colors and material ideas, our Bambu Lab filament guide covers other options.
High-Performance 3D Printer by Bambu Lab (AMS HT) for Dry, Ready Filament
Best for: Keeping ASA dry in multi-color setups
Pros
- Dries filament at 85C
- Airtight storage
- Up to 24 colors
- RFID sync
Cons
- Title calls it a printer; it is AMS HT
- Printer not included
Despite its title, the High-Performance 3D Printer by Bambu Lab listing describes the AMS HT, which is a filament storage, drying and feeding unit, not a printer on its own. The description calls it a high-capacity unit that can handle up to 24 colors and multiple materials in combination, with airtight storage.
For ASA, drying is the key feature. It heats filament up to 85C, uses an electromagnetic air vent for quick moisture removal, and has a rotating mechanism for automatic drying. It offers auto-match drying settings for official Bambu filaments, an RFID sensor, a brushless servo motor for smooth feeding, and a bypass outlet for soft or brittle materials. It weighs 1.21 kg.
This suits owners who print ASA and other moisture-sensitive materials often. You still need a compatible Bambu Lab printer. To see which printers pair with it, our Bambu Lab printer guide explains the lineup.
Bambu Lab Glue Stick for 3D Printer Build Plates for Better First Layers
Bambulab
Bambu Lab Glue Stick for 3D Printer Build Plates, 3D Printer Bed Adhesive for Improved First Layer Adhesion and Easy Release on Build Surface, Formaldehyde-Free, White, 1 Count
Price and specifications are read from the Amazon product page and can change.
Bambu Lab Glue Stick for 3D
Best for: Better first-layer grip
Pros
- Official Bambu Lab accessory
- Formaldehyde-free
- Fits all Bambu Lab printers
Cons
- ASA not named in compatibility list
- Small 21 g stick
The Bambu Lab Glue Stick for 3D printer build plates is an official accessory. A thin layer of glue helps the first layer of a print stick firmly to the bed and makes the finished part easier to release afterward. That matters with ASA, where warping can pull corners off the plate.
The listing says it is formulated for PLA, ABS, PETG, PC, PA and TPU; ASA is not named, although it is closely related to ABS. It is formaldehyde-free, compatible with all Bambu Lab printers, and contains one 21 g stick.
It is a handy add-on for any Bambu Lab owner, and a thoughtful stocking stuffer for someone who just got a printer. Apply a thin, even layer before printing and wash the plate occasionally so residue does not build up. Keep a stick nearby if your plates need extra grip.
How to Choose What You Need for ASA on a Bambu Lab
Start with the filament. If you have an AMS and want automatic settings, the RFID-tagged 3DTOOLS spool is the easiest. If you want a decorative finish and clear starting temperatures, choose the iSANGHU marble spool.
Plan for moisture. ASA prints best when dry. The iSANGHU spool arrives vacuum sealed, and the AMS HT can dry and store spools at up to 85C.
Fight warping. Use an enclosed printer or enclosure, a warm bed, low or no part cooling fan, and a glue stick for extra adhesion.
Check your printer. An open-frame printer can print ASA, but small parts with few corners are the best way to start. Larger flat pieces are much more likely to warp without a warm, enclosed space, so begin with signs, clips or brackets before attempting big panels.
Think about ventilation. ASA gives off a stronger smell than PLA while printing. Place the printer in a garage, workshop or well-ventilated room rather than a bedroom, especially for long prints.
Remember who makes what. The two ASA spools are third-party; the AMS HT and glue stick are Bambu Lab products.
FAQ
Is ASA better than PETG for outdoor parts?
ASA is designed for UV and weather resistance, and both listings say it keeps its shape at 100C, making it the stronger choice for sunny outdoor use.
Are these ASA spools made by Bambu Lab?
No. They are made by 3DTOOLS and iSANGHU for use with Bambu Lab printers.
Do I need an enclosure to print ASA?
The iSANGHU listing recommends one to prevent warping by keeping the print area warm.
Is the AMS HT a 3D printer?
No. Its description shows it is a filament drying and feeding unit that works with a Bambu Lab printer.
What print settings should I start with?
The iSANGHU listing suggests 240C to 260C nozzle, 80C to 120C bed, fan off and 30 to 70mm/s.
