xTool CO2 Laser Cutters and Alternatives for Home Crafters
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
xTool is one of the best-known names in desktop laser machines for makers, with a range that runs from compact engravers for gifts and small businesses up to large enclosed cutters built for production. If you searched for an xTool CO2 laser cutter, the most important thing to know is that only one machine in this group is clearly a CO2 laser, the P3. The others are diode or dual-laser machines, or accessories that support a CO2 setup.
The six products here split into three groups: the P3 80W CO2 cutter, two accessories (the P2 riser base and the AP2 smoke purifier), and three alternative machines that suit smaller spaces: the S1 40W, the F2 dual laser and the M2 10W crafter.
xTool Laser Cutters Compared
| Product | Type | Laser power | Work area / capacity | Listed weight |
|---|---|---|---|---|
| xTool P3 80W Flagship CO2 Laser | CO2 laser cutter | 80W CO2 | 36 x 18 in | 360 lb |
| xTool P2 Riser Base | Accessory for P2 | Not applicable | Workpiece height up to 8.4 in | Not listed |
| xTool SafetyPro AP2 Smoke Purifier | Accessory, fume purifier | Not applicable | For lasers with extraction of 150 m³/h or less | 20.9 kg (see note) |
| xTool S1 40W Laser Cutter | Enclosed laser cutter | 40W (type not named) | 23.93 x 15.16 in | 86.8 lb |
| xTool F2 5W IR & 15W Diode | Portable dual laser engraver | 15W diode + 5W IR | Not listed | 4.6 kg per features |
| xTool M2 10W Laser Engraver | Enclosed diode craft machine | 10W diode | Not listed | 36.2 lb |
Here is the difference in plain words. A CO2 laser uses a gas-filled tube to make a beam that is absorbed very well by wood, acrylic, leather and other organic materials, so it cuts thick material quickly, including clear acrylic that many other lasers pass straight through. A diode laser uses a small semiconductor, like a powerful LED, which makes machines smaller and simpler but slower on thick cuts. An infrared (IR) laser of a different wavelength is good at marking metal and some plastics. We compared xTool’s listings, not our own cutting tests.
xTool P3 80W Flagship CO2 Laser for Serious Cutting
xTool
xTool P3 80W Flagship CO2 Laser Cutter with Intelligent Automation
Price and specifications are read from the Amazon product page and can change.
xTool P3 80W Flagship CO2 Laser
Best for: Serious makers and small production shops
Pros
- 80W CO2, cuts 20mm wood
- 36 x 18 inch workspace
- LiDAR autofocus, dual cameras
Cons
- 360 pounds, needs dedicated space
- Class 1 but very large
The xTool P3 80W Flagship CO2 Laser is the true CO2 cutter in this guide. Its 80W CO2 laser is listed as cutting 20mm wood and 25mm acrylic, with a top speed of 1,200mm/s, and xTool highlights clear acrylic as a material diode engravers cannot handle. The workspace is a large 36 x 18 inches.
Much of the setup is automated. xTool’s Automated Creation System uses LiDAR ranging for autofocus, a dual HD camera system (a 16MP overhead camera plus a close-range detail camera) for positioning with 0.0079-inch alignment accuracy, and an AutoLift Base that raises objects up to 8.7 inches. AI Smart Nesting arranges parts to use up to 98.7% of a sheet, and Variable Batch Fill imports spreadsheets for personalized batches. Safety features include a fully enclosed Class 1 design with lid interlocks, active fire detection and suppression, and scrap buildup alerts. Optional add-ons include a conveyor feeder, a rotary attachment and a 5W IR module. It weighs 360 pounds, measures 49.21 x 30.71 x 19.53 inches and has a 12-month warranty.
This suits makers selling products, schools, and workshops that cut a lot of wood and acrylic. For a spare room or small desk, the P3 is simply too large, and the S1 or M2 fit better.
xTool P2 Riser Base for Tall Objects on the P2
xTool
xTool P2 Riser Base for xTool P2 Co2 Laser Cutter, Partner for Significant Upgrade on Engraving Thickness, Max Workpiece Height Up to 8.4''
Price and specifications are read from the Amazon product page and can change.
xTool P2 Riser Base for xTool
Best for: P2 owners engraving tall objects
Pros
- Up to 8.4 inch workpiece height
- Needed for RA2 Pro rotary
- Keeps work enclosed
Cons
- Accessory, not a laser
- Title says P2, text says P2S
The xTool P2 Riser Base for xTool P2 CO2 laser cutter is an accessory, not a laser. It sits under a P2 machine and lets you work on items up to 8.4 inches tall, such as a trunk or briefcase, and batch process several thick items. It is a 9-level metal base.
The listing explains that the RA2 Pro rotary attachment for cylinders like wine glasses, tumblers, baseball bats, rings and mugs cannot be assembled without this riser. It is also designed to pair with the Automatic Conveyor Feeder, sold separately, and keeps tall-object work fully enclosed so light and smoke do not escape. A storage space on the right side holds removed screws, slats or the RA2 Pro. The title names the P2, while the feature text calls it the P2S riser base, so confirm it matches your machine.
This is only for existing P2 owners. It does not fit or add value to the P3, S1, F2 or M2 based on this listing.
xTool SafetyPro AP2 Smoke Purifier for Cleaner Indoor Air
xTool
xTool SafetyPro AP2 Smoke Purifier for Laser Engraver, SuperCyclone System 6-Layer Filtration for Dust & Odors, Quiet Operation for Diode Fiber Laser Engraving Machine and CO2 Laser Cutter
Price and specifications are read from the Amazon product page and can change.
xTool SafetyPro AP2 Smoke Purifier
Best for: Indoor workshops needing fume control
Pros
- 6-layer filtration
- 36-cyclone pre-separation
- Auto sync with xTool lasers
Cons
- Weight figures conflict
- 55 dB noise level
The xTool SafetyPro AP2 Smoke Purifier tackles the smoke and smell that every laser produces. It uses a 6-layer filtration system that xTool says removes 99.99% of dust and odors, plus SuperCyclone technology with 36 cyclones that catch 99% of large particles before they reach the filters. The listing claims up to 10 times longer filter life, and a magnetic pull-out door makes filter changes easy.
It auto-syncs with xTool lasers, offers material-based settings and real-time filter monitoring, and runs at 55 dB. An Ultra-Dense Carbon Mesh filter absorbs odors and chemicals. It works with diode lasers and with CO2 cutters that have fume extraction of 150 m³/h or less, and also with laser-equipped and FFF 3D printers. One conflict: a feature line mentions 20 lbs while the specifications say 20.9 kg, so plan for the heavier figure.
This suits anyone running a laser indoors without a window vent. Check the P3’s extraction rate with xTool before pairing, since the AP2 lists a 150 m³/h limit.
xTool S1 40W Laser Cutter for Home Crafters
xTool
xTool S1 40W Laser Cutter and Laser Engraver for Tumblers, 23.93" x 15.16" Bed Size, 600mm/s Speed, Laser Engraving Machine, Laser Engraver for Wood and Metal, Acrylic, Big Project – Rotary Bundle
Price and specifications are read from the Amazon product page and can change.
xTool S1 40W Laser Cutter
Best for: First enclosed laser for home crafters
Pros
- 40W laser, 18mm cherry in one pass
- Class 1 enclosed, 5 flame sensors
- Rotary bundle for tumblers
Cons
- Laser source not named in listing
- 8 pounds
The xTool S1 40W Laser Cutter is a powerful enclosed machine that suits a home workshop. Its 40W laser is listed as cutting 18mm cherry wood in a single pass, with engraving up to 600mm/s on a 23.93 x 15.16 inch bed, and this listing is a rotary bundle for engraving tumblers. The listing does not name the laser source; it mentions laser tube aging in its testing description, so ask the seller if the laser type matters to your purchase.
It has patented Pin-point Positioning, 3D engraving on curved surfaces like spoons and plates, auto-focus and xTool Creative Space software with presets for more than 400 materials. Its Class 1 cover filters 99% of laser light, so goggles are not needed, and 5 built-in flame sensors stop operation if fire is detected. The frame is 3mm aluminum, and it weighs 86.8 pounds.
This is the practical pick for a first serious machine at home. It gives way to the P3 for thick acrylic and production volume. Anyone considering a stronger diode upgrade can read our xTool 20W laser module guide.
xTool F2 5W IR & 15W Diode for Portable Personalization
Best for: Pop-up shops and metal marking
Pros
- 15W diode plus 5W IR
- 50MP camera
- Portable at 4.6 kg
Cons
- Class 4 laser product
- Small work area
The xTool F2 5W IR & 15W dual laser engraver pairs a 15W diode for 3D embossing and cutting with a 5W infrared laser for dark, vivid color marking on metal. It works on more than 300 materials, reaches speeds up to 6,000mm/s and uses a 50MP camera for 0.1mm alignment on small pieces.
It weighs 4.6 kg according to its features, arrives assembled, and has a fully enclosed, leak-proof design with a built-in fan. Note that the listing classifies the F2 as a Class 4 laser product, a higher hazard class than the Class 1 machines here, so follow the safety guidance closely. It includes a base plate and material kit, with optional RA3 rotary and Slide Extension.
This suits vendors personalizing items at fairs and pop-ups. It is not a cutter for thick sheets.
xTool M2 10W Laser Engraver for Paper and Fabric Crafts
Best for: Paper, felt and gift crafters
Pros
- Class 1 enclosed
- Dual cameras and templates
- Optional CMYK inkjet module
Cons
- 10W diode, lighter cutting
- Inkjet and IR sold separately
The xTool M2 10W Laser Engraver is aimed at home crafters. It has a 10W diode laser, dual cameras for real-time preview and a Class 1 enclosed design. It works on cardstock, felt, leather, wood, paper and fabric, and xTool Studio software offers templates and an AI image generator.
An optional CMYK Inkjet module adds full-color printing, and an optional 3W IR laser adds fine metal and plastic engraving; both, along with the RA3 Lite rotary, are sold separately. It weighs 36.2 pounds with a 1-year warranty.
This suits card makers, sticker sellers and gift crafters. It is not meant for thick wood or acrylic.
How to Choose the Right xTool Laser
Need true CO2. The P3 is the only CO2 laser here. Choose it for thick wood and clear acrylic.
Space. The P3 weighs 360 pounds. The S1 and M2 suit a sturdy table; the F2 is portable.
Materials. Metal marking favors the F2’s IR laser. Paper and fabric suit the M2.
Ventilation. The AP2 purifier helps indoors. For heavy metal work, a laser welder is a different tool entirely.
FAQ
Is the xTool S1 a CO2 laser?
The listing does not name its laser type. The P3 is the machine clearly described as CO2 here.
Can a diode laser cut clear acrylic?
xTool’s P3 listing says clear acrylic is a material diode engravers cannot handle.
Does the P2 riser base fit the P3?
The listing names the P2 and P2S only.
Do I need a smoke purifier?
If you cannot vent outside, a purifier like the AP2 filters dust and odors.
Which xTool laser is best for beginners?
The M2 for crafts, or the S1 for cutting wood.
