Cordless Brad Nailers That Fit Your DeWalt Battery

Gauge is the thickness of the nail, and the number works backward: a higher gauge is thinner. 18 gauge (18GA) brads are thin, which is why they are used for trim and molding, where you want a small hole that is easy to fill. Nail length decides how far you can fasten through; baseboards and thicker trim usually call for longer brads, while craft work uses short ones. Crown staples have a flat top bridge and two legs; the “crown” width is the width of that bridge. Single fire shoots one nail per trigger pull for accuracy, while contact or bump fire shoots each time the nose touches the wood while the trigger is held, which is faster but less precise. Depth adjustment sets how deep the nail sinks.

Adotocam

Cordless Brad Nailer Compatible with DeWalt 20V Battery (No Battery)

8.0/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

Cordless Brad Nailer Compatible with DeWalt

Best for: Short trim nails and light stapling

Pros

• Brads 5/8 to 1-1/4 in
• Staple mode
• Safety nose and LED

Cons

• Third-party, not DeWalt
• No 2 in nails

The Cordless Brad Nailer Compatible with DeWalt 20V Battery is made by ADOTOCAM. It is sold without a battery and lists compatibility with many DeWalt packs, including the DCB206, DCB205, DCB204, DCB181, DCB182, DCB200 and DCB203. It is a 2-in-1 tool that drives 18 GA brad nails from 5/8 to 1-1/4 inches and 1/4 inch 18GA crown staples from 5/8 to 1 inch.

Depth is set with a tool-free rotary knob. For safety, it fires only when the nose pin is fully pressed against the work surface. It has an LED light, a belt hook and a lightweight build to reduce fatigue. The listing does not specify firing modes, weight, included fasteners or warranty.

This suits light trim, picture frames, crafts and small repairs. For baseboards that need longer nails, the 2 inch models below are the better fit.

High score Our score: 9.2/10

Eisenhagen

Cordless 2" Brad Nailer Compatible with Dewalt 20V Battery (No Battery and Charger), 2-in-1 Electric Nail Gun, 20V Staple Gun Battery Powered with 2000 Nails for Woodworking & Home

9.2/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

Cordless 2″ Brad Nailer Compatible

Best for: Bulk fasteners and a listed warranty

Pros

• 2000 fasteners included
• Magnesium body
• Anti-dry-fire
• 1-year warranty

Cons

• Best with 4.0Ah+ battery
• Bump fire needs care

Best for: Baseboards needing longer 2 in brads

Pros

• Brads 3/4 to 2 in
• Single and contact fire
• 1000 fasteners included
• 100-nail magazine

Cons

• Third-party, not DeWalt
• Warranty not stated

The Cordless 2″ Brad Nailer Compatible with DeWalt 20V Battery from ADOTOCAM drives 18GA brad nails from 3/4 to 2 inches and 18GA crown staples from 3/4 to 1-9/16 inches. It lists the same DeWalt battery compatibility as the model above.

It offers single-shot and contact-fire modes, tool-free depth adjustment, a tool-free jam release, a 100-nail magazine and an LED light. The listing describes it as using pneumatic impact technology without hoses or a compressor. In the box: the nail gun, 700 nails, 300 staples, a storage bag and instructions. The maker offers a 45-day satisfaction guarantee; a warranty is not stated. The listed item weight of 8.64 pounds likely includes packaging, since the listing gives only package dimensions.

Pick this for baseboards, door casing and furniture projects where you want the flexibility of 2 inch brads. If you are weighing it against a hose-and-compressor setup, our mini compressor for a DeWalt nail gun guide explains that route.

The Cordless 2″ Brad Nailer Compatible with Dewalt 20V Battery from Eisenhagen has the same nail and staple ranges as the ADOTOCAM 2 inch model: 18GA brads from 3/4 to 2 inches and 18GA crown staples from 3/4 to 1-9/16 inches. The listing recommends a 4.0Ah or larger DeWalt battery for best performance.

It offers single fire and bump fire; the listing notes that in bump fire you should lift the tool between shots to avoid misfires or incomplete drives. It has a tool-free depth dial, tool-free jam release, 100-nail magazine, LED worklight, belt hook, safety nose and anti-dry-fire mechanism, which stops the tool from firing when the magazine is empty. The body is magnesium, and it is backed by a 1-year warranty and a 45-day satisfaction guarantee. It includes 1,400 nails and 600 staples.

This is the pick for someone who wants lots of fasteners in the box and a clearly stated warranty. It gives way to the KEENTECH if you care most about clean, flush nailing in hardwood.

High score Our score: 9.2/10

Keentech

18 GA Cordless Brad Nailer for Dewalt 20V Battery (No Battery)

9.2/10Our score, based on listed specifications and buyer feedback

See it on Amazon

Price and specifications are read from the Amazon product page and can change.

18 GA Cordless Brad Nailer

Best for: Clean, flush trim in hardwood

Pros

• Cylinder-driven system
• 200+ nails per minute
• Tested for 100,000+ shots
• 3-year after-sales service

Cons

• No staple mode
• Max 1-1/4 in brads

The 18 GA Cordless Brad Nailer for Dewalt 20V Battery is made by KEENTECH. It uses a cylinder-driven system that, according to the listing, drives nails cleanly and flush into hardwood rather than leaving them sticking out. It accepts brads from 3/8 to 1-1/4 inches (10 to 32mm) and includes 1,000 one-inch brads and a belt hook. The listing does not mention staples.

It has single and contact firing, a firing rate of 200+ nails per minute and a safety lock switch. The maker says it is tested for 100,000+ shots and offers 3-year after-sales service with replacements instead of repairs. The item weight is 4.84 pounds.

This suits careful trim work, molding and furniture assembly. It is not the pick if you need 2 inch brads or a stapler.

Best for: Furniture upholstery plus trim

Pros

• Brads 5/8 to 2 in
• U-staples 3/4 to 1-5/8 in
• Wide battery list

Cons

• Listing mentions car polisher by mistake
• Heavy 10.21 lb listed weight

The 2″ Cordless Brad Nailer & Staple for Dewalt 20V Battery is made by VERVEWAVE and sold tool only. It lists the widest range of compatible DeWalt batteries in this group, from the DCB200 to the DCB240. It drives 18GA straight nails from 5/8 to 2 inches and U-shaped staples from 3/4 to 1-5/8 inches.

It has single and contact fire, adjustable nailing depth, a safety lock and a non-slip grip. Be aware of two oddities in the listing: a notice line calls it a “Car Polisher Tool Only,” which is clearly a copy error, and the item weight is given as 10.21 pounds, which likely includes packaging. The listing does not state a warranty or included fasteners.

Choose this if you plan to reupholster furniture and also nail trim. For comparison with a genuine DeWalt tool, see our DeWalt 18GA brad nailer guide.

Best for: Upholstery, crafts and fabric

Pros

• Brads plus T50 and 10J staples
• Light 3.01 lb
• 2000 fasteners included

Cons

• Max 5/8 in fasteners
• Not for baseboards

The 3-in-1 Cordless Staple Gun & Brad Nailer from WISLET is really a light-duty stapler that also shoots brads. It supports brad nails, T50 crown staples and 10J crown staples from 1/4 to 5/8 inch, and includes 1,000 brads and 1,000 10J staples.

It has tool-free depth adjustment up to 5/8 inch, single-shot and continuous modes at up to 120 to 150 fasteners per minute, a safety nose, a rubberized grip and a 90-fastener magazine. It weighs 3.01 lb.

This is ideal for upholstery, cabinets backs, fabric, leather and crafts. Its 5/8 inch maximum is too short for baseboards.