TEKTON Punch Sets: Roll Pin, Chisel or Alignment Punches?
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
TEKTON is a hand tool brand known for straightforward, well-made tools and a very simple warranty: its listings say “no time limits, no receipts.” Its punches and chisels are made in the USA from 5160 high carbon steel, individually heat treated so the tip is hard while the striking end stays slightly softer to absorb hammer blows, and finished with a dry, rust-preventative coating. Sizes are laser marked so you can read them at a glance.
If you are buying for a new home mechanic, the confusing part is the names. A punch is a steel rod you hit with a hammer, and each shape does a different job: pushing pins out, marking a spot before drilling, lining up holes, or cutting metal. In one sentence, these six TEKTON options range from a roll pin set and a single roll pin punch, through an 18-piece set with a walnut block and two 20-piece punch and chisel sets, to a 3-piece alignment punch set.
TEKTON Punch Sets Compared

Tekton
TEKTON Punch and Chisel Set with Roll, 20-Piece | PNC99101
Price and specifications are read from the Amazon product page and can change.
TEKTON Punch and Chisel
Best for: Mechanics working on the go
Pros
- Same 20 pieces as PNC99001
- Roll keeps punches from sliding
- Four punch and chisel types
Cons
- No roll pin punches

Best for: General auto and home repair
Pros
- 20 pieces incl. cold chisels
- Pin punches up to 3/8 in
- Two center punches
Cons
- No roll pin punches
- No case listed

Best for: Gift-ready bench set for gunsmithing
Pros
- 18 pieces, four punch types
- Solid walnut bench block
- Reverse-tapered pin punches
Cons
- No cold chisels
- Block is for bench, not travel
| Set | Pieces | Punch types | Size range | Storage |
|---|---|---|---|---|
| TEKTON Roll Pin Punch (PNC93001) | 8 | Roll pin | 1/16 to 1/4 in | Not listed |
| TEKTON Punch Set with Walnut Block (66564) | 18 | Pin, roll pin, solid, center | 1/16 to 5/16 in | Walnut bench block |
| TEKTON Punch and Chisel (PNC99001) | 20 | Pin, solid, center, cold chisel | 1/16 in to 1 in chisel | Not listed |
| TEKTON Punch and Chisel with roll (PNC99101) | 20 | Pin, solid, center, cold chisel | 1/16 in to 1 in chisel | Tool roll |
| TEKTON 1/16 Inch Roll Pin Punch (66061) | 1 | Roll pin | 1/16 in | Not applicable |
| TEKTON Long Alignment Punch (66556) | 3 | Alignment | 3/16 to 5/16 in | Not listed |
Here is a quick glossary. A pin punch has a flat tip and pushes solid pins out of holes. A roll pin punch has a small ball on the tip that sits inside a hollow, springy “roll pin” so the pin is not crushed. A solid punch is short and stout for breaking loose rusted pins and rivets. A center punch has a sharp point that makes a small dent so a drill bit does not wander. A cold chisel cuts or splits metal, and an alignment punch has a long taper for lining up holes in two parts.
TEKTON Roll Pin Punch Set for Hollow Pins

Tekton
TEKTON Roll Pin Punch Set, 8-Piece | PNC93001
Price and specifications are read from the Amazon product page and can change.
TEKTON Roll Pin Punch
Best for: Removing hollow roll pins
Pros
- 8 sizes, 1/16 to 1/4 in
- Guide ball tip
- 5160 high carbon steel
- Made in USA
Cons
- Roll pin punches only
- No storage holder listed
The TEKTON Roll Pin Punch set (PNC93001) includes eight roll pin punches in 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4 inch. Roll pins are hollow, slit tubes that hold parts together in everything from lawn mower handles to firearm components, and a regular flat punch can squash or flare them.
The description says each punch has a guide ball on the tip, which sits inside the hollow pin to keep the punch centered, and a long, straight shaft machined to precise tolerances so you can drive pins out or back in without damaging the pin or the part. The listing gives product dimensions of 8 by 3.7 by 0.5 inches and an item weight of 0.8 ounces, which seems too light for eight steel punches, so treat that figure with caution. The listing does not mention a holder or case.
It suits anyone who has already run into roll pins and wants the right tool. If you also need flat pin punches and a center punch, the walnut block set includes this same run of eight roll pin sizes plus more.
TEKTON Punch Set with Walnut Block for a Tidy Workbench
The TEKTON Punch Set with Walnut Block (66564) is the most gift-friendly option. It has 18 pieces across four punch types: seven pin punches from 1/16 to 1/4 inch, eight roll pin punches from 1/16 to 1/4 inch, two solid punches in 1/16 and 3/32 inch, and one 5/16-inch center punch. They all stand in a solid walnut block that keeps them organized and within reach on a bench.
The listing says the pin and roll pin punches are reverse tapered, meaning the tip is a touch wider than the shaft behind it, so they will not stick in the hole as you drive a pin through. The solid punches are described as stout and powerful for loosening rusted or frozen pins and driving out rivets. It is made in the USA and carries TEKTON’s no-time-limit warranty.
It suits hobbyists who work on small precision parts at a bench, such as gunsmithing, clock repair or small engine work. It has no chisels and the block stays on the bench, so a mechanic who needs cutting tools or portability should look at the 20-piece sets.
TEKTON Punch and Chisel Set PNC99001 for General Repairs
The TEKTON Punch and Chisel set PNC99001 covers the widest range of jobs. Its 20 pieces include nine pin punches from 1/16 to 3/8 inch, five cold chisels from 1/4 to 1 inch, four solid punches from 1/16 to 1/4 inch and two center punches in 1/4 and 3/8 inch.
This mix is what most home mechanics reach for: pin punches for pushing out solid pins, solid punches for stubborn rusted ones, center punches for marking drill holes, and cold chisels for cutting off seized bolts or splitting nuts. The listing gives a weight of 4.4 pounds, made in the USA, with the same heat treatment, rust-preventative coating and laser markings as the rest of the line.
It suits garage DIYers and new car owners building a first toolbox. It does not include roll pin punches, and the listing does not mention a case, so if you want a roll to carry it, see the PNC99101 below. It pairs well with a 1/2-inch socket set for suspension and brake work.
TEKTON Punch and Chisel Set with Roll PNC99101 for Portability
The TEKTON Punch and Chisel set with roll, PNC99101, has exactly the same 20 tools as the PNC99001: nine pin punches, five cold chisels, four solid punches and two center punches, all in the same sizes.
The difference is the included punch and chisel roll, a fabric wrap with pockets. The listing says it keeps punches well packed so they cannot slide out, which makes the set easy to toss in a truck, a job box or a toolbox drawer without the pieces rattling around. Materials, heat treatment, markings and warranty match the rest of the line.
It suits mobile mechanics, farm and ranch users, and anyone who works away from a bench. If the tools will live in a drawer at home, the PNC99001 without the roll covers the same jobs.
TEKTON 1 16 Inch Roll Pin Punch 66061 for Small Jobs
Best for: Replacing one lost small punch
Pros
- Self-centering guide ball tip
- Reverse taper shaft
- Lifetime warranty terms
Cons
- Single 1/16 in size only
The TEKTON 1 16 Inch Roll Pin punch (66061) is a single tool, not a set. It is the smallest roll pin size, 1/16 inch, and the description says it is ideal for machine, small equipment and gun repairs.
It has a reverse taper shaft and a self-centering guide ball tip that seats fully against the pin wall to prevent slipping or damage and to avoid sticking in the hole. The listing says it is made from premium high carbon steel with individual heat treatment and a dry-touch rust-preventative finish, and the title says it is made in USA.
It suits someone who has lost or bent the smallest punch in a set, since tiny punches are the easiest to break. For a full range of sizes, the PNC93001 roll pin set includes this size and seven larger ones.
TEKTON Long Alignment Punch Set for Lining Up Parts
Best for: Lining up bolt holes during assembly
Pros
- Long tapered shafts
- 3/16, 1/4, 5/16 in sizes
- Made in USA
Cons
- Not for driving out pins
- Only three sizes
The TEKTON Long Alignment Punch set (66556) has three punches in 3/16, 1/4 and 5/16 inch. Unlike the other punches here, they are not mainly for driving pins out. Each has a blunt end and a long, gradually tapered shaft that you slide through holes in two parts to line them up for assembly.
A typical example is bolting a bracket, exhaust hanger or body panel: you push the alignment punch through both holes to hold them in line, fit a bolt in another hole, then pull the punch out and fit the last bolt. The listing names 5160 high carbon steel, individual heat treatment, rust-preventative coating, laser markings and US manufacture.
It suits anyone doing assembly work on cars, trailers or machinery. It complements rather than replaces a pin punch set, so gift-givers might pair it with one of the 20-piece sets.
How to Choose the Right TEKTON Punch Set
Roll pin vs pin punch. If the pins you are removing are hollow and slit, use roll pin punches with a guide ball tip (PNC93001, the 66061 or the walnut block set). If they are solid, use flat pin punches (walnut block set or either 20-piece set).
Do you need chisels. Only the PNC99001 and PNC99101 include cold chisels for cutting and splitting metal.
Where the tools will live. The walnut block suits a bench, the roll in the PNC99101 suits travel, and the other sets do not list storage.
What else is in the toolbox. Punches work alongside sockets and drivers. A compact 1/4-inch ratchet is a natural companion for small fasteners near roll pins.
FAQ
What is the difference between a roll pin punch and a pin punch?
A roll pin punch has a small ball tip that sits inside a hollow roll pin so it does not crush it. A pin punch has a flat tip for pushing solid pins.
Which TEKTON set has the walnut block?
The 18-piece 66564 set includes a solid walnut bench block that holds all the punches upright.
Are TEKTON punches made in the USA?
Yes. The listings for these sets and single punches state they are made in the USA.
What warranty do TEKTON punches have?
The listings say “no time limits, no receipts,” with details at TEKTON’s warranty page.
Can I use an alignment punch to drive out pins?
Alignment punches are designed to line up holes for assembly. For driving pins out, use a pin or roll pin punch.
Which TEKTON punch set is best for a beginner?
The 20-piece PNC99001 covers the most everyday jobs. Choose the PNC99101 if you want the carrying roll.


